In this video lesson we show how Live Data can be plotted using a PyQt window. Our eventual goal is to bring in live data from the Raspberry Pi Pico W using UDP over WiFi, but to learn the concepts today, we will be generating a live sin wave to show how the plotting works. Here is the code we developed in this lesson:

import sys
import numpy as np
import pyqtgraph as pg
from PyQt5.QtWidgets import *
from PyQt5.QtCore import *

numPoints = 200
xStart = 0
xStop = 4*np.pi

frequency = 1
Inc = (2*np.pi/numPoints)

count=0
incR=1
incG=2

x=np.linspace(xStart,xStop,numPoints)
ySin=np.sin(frequency*x)
ySin2 = np.sin(frequency*x + 2*np.pi/3)
ySin3 = np.sin(frequency*x + 4*np.pi/3)

def updatePlot():
    global numPoint,xStart,xStop,Inc,frequency,count
    xStart=xStart + Inc
    xStop=xStop + Inc
    x =np.linspace(xStart, xStop , numPoints)
    ySin=np.sin(frequency*x+count*incR/100*frequency)
    ySin2 = np.sin(frequency*x + 2*np.pi/3+count*incG/100*frequency)
    ySin3 = np.sin(frequency*x + 4*np.pi/3)
    
    plotSin.setData(x, ySin)
    plotSin2.setData(x, ySin2)
    plotSin3.setData(x, ySin3)
    
    count=count+1

def updateFrequency(value):
    global frequency, sliderLabel
    frequency = value/10
    sliderLabel.setText("Frequency: "+str(frequency)+" Hz")

app=QApplication(sys.argv)
window = QWidget()
window.setWindowTitle("The Magic of Sin Waves")
window.setGeometry(100,100,800,600)
layout = QVBoxLayout(window)

sliderLabel=QLabel("Frequency: 1 Hz")
sliderLabel.setStyleSheet("font-size: 40px;")
layout.addWidget(sliderLabel)

slider = QSlider(Qt.Horizontal)
slider.setMinimum(1)
slider.setMaximum(40)
slider.setValue(10)
slider.valueChanged.connect(updateFrequency)
layout.addWidget(slider)

graphWidget =pg.PlotWidget()
layout.addWidget(graphWidget)
plotSin=graphWidget.plot(x,ySin,pen=pg.mkPen('r',width=4))
plotSin2=graphWidget.plot(x,ySin2,pen=pg.mkPen('g',width=4))
plotSin3=graphWidget.plot(x,ySin3,pen=pg.mkPen('b',width=4))
graphWidget.setYRange(-1.25,1.25)

timer = QTimer()
timer.timeout.connect(updatePlot)
timer.start(100)

window.setLayout(layout)
window.show()
sys.exit(app.exec_())

import sys

import numpy as np

import pyqtgraph as pg

from PyQt5.QtWidgets import *

from PyQt5.QtCore import *

numPoints = 200

xStart = 0

xStop = 4*np.pi

frequency = 1

Inc = (2*np.pi/numPoints)

count=0

incR=1

incG=2

x=np.linspace(xStart,xStop,numPoints)

ySin=np.sin(frequency*x)

ySin2 = np.sin(frequency*x + 2*np.pi/3)

ySin3 = np.sin(frequency*x + 4*np.pi/3)

def updatePlot():

global numPoint,xStart,xStop,Inc,frequency,count

xStart=xStart + Inc

xStop=xStop + Inc

x =np.linspace(xStart, xStop , numPoints)

ySin=np.sin(frequency*x+count*incR/100*frequency)

ySin2 = np.sin(frequency*x + 2*np.pi/3+count*incG/100*frequency)

ySin3 = np.sin(frequency*x + 4*np.pi/3)

plotSin.setData(x, ySin)

plotSin2.setData(x, ySin2)

plotSin3.setData(x, ySin3)

count=count+1

def updateFrequency(value):

global frequency, sliderLabel

frequency = value/10

sliderLabel.setText("Frequency: "+str(frequency)+" Hz")

app=QApplication(sys.argv)

window = QWidget()

window.setWindowTitle("The Magic of Sin Waves")

window.setGeometry(100,100,800,600)

layout = QVBoxLayout(window)

sliderLabel=QLabel("Frequency: 1 Hz")

sliderLabel.setStyleSheet("font-size: 40px;")

layout.addWidget(sliderLabel)

slider = QSlider(Qt.Horizontal)

slider.setMinimum(1)

slider.setMaximum(40)

slider.setValue(10)

slider.valueChanged.connect(updateFrequency)

layout.addWidget(slider)

graphWidget =pg.PlotWidget()

layout.addWidget(graphWidget)

plotSin=graphWidget.plot(x,ySin,pen=pg.mkPen('r',width=4))

plotSin2=graphWidget.plot(x,ySin2,pen=pg.mkPen('g',width=4))

plotSin3=graphWidget.plot(x,ySin3,pen=pg.mkPen('b',width=4))

graphWidget.setYRange(-1.25,1.25)

timer = QTimer()

timer.timeout.connect(updatePlot)

timer.start(100)

window.setLayout(layout)

window.show()

sys.exit(app.exec_())

Arduino

Portable Arduino Barometric Weather Station

March 13, 2025 admin

In this video lesson we take you through the project of building an Arduino Barometric Pressure Weather Station. It builds on the last two lessons in this series. We measure and display instantaneous Barometric Pressure, normalized to Sea Level. Then in the lower portion on the OLED SSD1306 display, we show a graph of the barometric pressure over the last 24 hours.

Arduino Altimeter — Schematic for the Portable Arduino Barometric Pressure Sensor

When using the breadvolt, or any battery power supply on a breadboard project, do not turn the power supply on while the Raspberry Pi Pico is connected to USB, as you could generate voltage conflicts. It is an either or. If the USB is connected, the power supply should be OFF. Or if you are going to connect the USB, first turn off the power supply.

Below we include the code we develop in the above video. Make sure to set the ‘alt’ variable to your elevation at your location, in meters.

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <Adafruit_BMP085.h>

int lastUpdate = 0;
int updateInterval = 600000;

float rawXdata[128];
int normXdata[128];

float rawYdata[128];
int normYdata[128];

float xMin = 0;
float xMax = 127;

float yMin = 28;
float yMax = 31;

float Pt = 14;
float Pb = 63;

float Pl = 0;
float Pr = 127;

int numPoints = 128;

Adafruit_BMP085 BP;
bool BMPconnected = false;

float BarPress = 30;
float BarPressNow = 30;
float alt = 1127;

int screenWidth = 128;
int screenHeight = 64;
int oledReset = -1;
#define SCREEN_ADDRESS 0x3C
Adafruit_SSD1306 oled(screenWidth, screenHeight, &Wire, oledReset);

void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);
  BMPconnected = BP.begin();
  if (BMPconnected == true) {
    Serial.println("BMP180 found and Connected");
  }
  if (BMPconnected == false) {
    Serial.println("BMP180 not found, Check Connections");
  }
  oled.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS);
  oled.clearDisplay();
  oled.display();
  for (int i = 0; i < numPoints; i= i + 1) {
    rawXdata[i] = i;
  }
}

void loop() {
  // put your main code here, to run repeatedly:
  BarPressNow = normPress(alt);
  BarPress = .95 * BarPress + .05 * BarPressNow;
  if (millis() - lastUpdate >= updateInterval) {
    for (int i = 0; i < numPoints - 1; i = i + 1) {
      rawYdata[i] = rawYdata[i + 1];

    }
    lastUpdate=millis();
    rawYdata[numPoints-1]=BarPress;
    normData();
    oled.clearDisplay();
    plotGraph();
  }
  oled.clearDisplay();
  oled.setCursor(0, 0);
  oled.setTextColor(WHITE);
  oled.setTextSize(2);
  oled.print(BarPress);
  oled.setTextSize(1);
  oled.println(" In HG");
  normData();
  plotGraph();
  oled.display();
  delay(.1);
}

float normPress(float elev) {
  float BPRaw;
  float BPNorm;
  float T0 = 288.15;
  float L = .0065;
  float R = 8.3144598;
  float M = .0289644;
  float g = 9.8;
  float c = M * g / (R * L);
  BPRaw = BP.readPressure() * .0002953;
  BPNorm = BPRaw / pow(1 - L * elev / T0, c);
  return BPNorm;
}
void normData() {
  for (int i = 0; i < numPoints; i = i + 1) {
    normYdata[i] = (Pb - Pt) / (yMin - yMax) * (rawYdata[i] - yMax) + Pt;
    normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;
  }
}
void plotGraph() {
  oled.drawLine(Pl, Pt, Pl, Pb, WHITE);
  oled.drawLine(Pl, Pb, Pr, Pb, WHITE);
  int MID = (Pb - Pt) / (yMin - yMax) * (29.92 - yMax) + Pt;
  oled.drawLine(Pl, MID, Pr, MID, WHITE);
  for (int i = 0; i < numPoints - 1; i = i + 1) {
    oled.drawLine(normXdata[i], normYdata[i], normXdata[i + 1], normYdata[i + 1], WHITE);
  }
}

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

#include <SPI.h>

#include <Wire.h>

#include <Adafruit_GFX.h>

#include <Adafruit_SSD1306.h>

#include <Adafruit_BMP085.h>

int lastUpdate = 0;

int updateInterval = 600000;

float rawXdata[128];

int normXdata[128];

float rawYdata[128];

int normYdata[128];

float xMin = 0;

float xMax = 127;

float yMin = 28;

float yMax = 31;

float Pt = 14;

float Pb = 63;

float Pl = 0;

float Pr = 127;

int numPoints = 128;

Adafruit_BMP085 BP;

bool BMPconnected = false;

float BarPress = 30;

float BarPressNow = 30;

float alt = 1127;

int screenWidth = 128;

int screenHeight = 64;

int oledReset = -1;

#define SCREEN_ADDRESS 0x3C

Adafruit_SSD1306 oled(screenWidth, screenHeight, &Wire, oledReset);

void setup() {

// put your setup code here, to run once:

Serial.begin(9600);

BMPconnected = BP.begin();

if (BMPconnected == true) {

Serial.println("BMP180 found and Connected");

}

if (BMPconnected == false) {

Serial.println("BMP180 not found, Check Connections");

}

oled.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS);

oled.clearDisplay();

oled.display();

for (int i = 0; i < numPoints; i= i + 1) {

rawXdata[i] = i;

}

void loop() {

// put your main code here, to run repeatedly:

BarPressNow = normPress(alt);

BarPress = .95 * BarPress + .05 * BarPressNow;

if (millis() - lastUpdate >= updateInterval) {

for (int i = 0; i < numPoints - 1; i = i + 1) {

rawYdata[i] = rawYdata[i + 1];

}

lastUpdate=millis();

rawYdata[numPoints-1]=BarPress;

normData();

oled.clearDisplay();

plotGraph();

}

oled.clearDisplay();

oled.setCursor(0, 0);

oled.setTextColor(WHITE);

oled.setTextSize(2);

oled.print(BarPress);

oled.setTextSize(1);

oled.println(" In HG");

normData();

plotGraph();

oled.display();

delay(.1);

}

float normPress(float elev) {

float BPRaw;

float BPNorm;

float T0 = 288.15;

float L = .0065;

float R = 8.3144598;

float M = .0289644;

float g = 9.8;

float c = M * g / (R * L);

BPRaw = BP.readPressure() * .0002953;

BPNorm = BPRaw / pow(1 - L * elev / T0, c);

return BPNorm;

}

void normData() {

for (int i = 0; i < numPoints; i = i + 1) {

normYdata[i] = (Pb - Pt) / (yMin - yMax) * (rawYdata[i] - yMax) + Pt;

normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;

}

void plotGraph() {

oled.drawLine(Pl, Pt, Pl, Pb, WHITE);

oled.drawLine(Pl, Pb, Pr, Pb, WHITE);

int MID = (Pb - Pt) / (yMin - yMax) * (29.92 - yMax) + Pt;

oled.drawLine(Pl, MID, Pr, MID, WHITE);

for (int i = 0; i < numPoints - 1; i = i + 1) {

oled.drawLine(normXdata[i], normYdata[i], normXdata[i + 1], normYdata[i + 1], WHITE);

}

Arduino

Plot any Data or Graph on any OLED

March 6, 2025 admin

In this video I show you how you can easily plot any graph or data onto any OLED display. We create a mathematical function which will map the raw data onto the screen. We demonstrate the function with a sin wave, but the function will work with any equation or data. This is the code which we developed in the video.

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

float rawXdata[128];
int normXdata[128];

float rawYdata[128];
int normYdata[128];

float xMin = 0;
float xMax = 2 * 3.1415;

float yMin = -1;
float yMax = 1;

float Pt = 0;
float Pb = 63;

float Pl = 0;
float Pr = 127;

float pi = 3.14159265;

int numPoints = 128;

int screenWidth = 128;
int screenHeight = 64;
int oledReset = -1;
#define SCREEN_ADDRESS 0x3C
Adafruit_SSD1306 oled(screenWidth, screenHeight, &Wire, oledReset);

int j=0;

void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  oled.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS);
  oled.clearDisplay();
  oled.display();
}
void loop() {
  // put your main code here, to run repeatedly:

  for (int i = 0; i < numPoints; i = i + 1) {
    rawXdata[i] = i * (2 * pi / 127);
    rawYdata[i] = sin(rawXdata[i]);
    Serial.println(rawYdata[i]);
    delay(100);
  }
normData();
plotGraph();
oled.display();
}

void normData() {
  for (int i = 0; i < numPoints; i = i + 1) {
    normYdata[i] = (Pb - Pt) / (yMin - yMax) * (rawYdata[i] - yMax) + Pt;
    normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;
  }
}
void plotGraph(){
    oled.drawLine(Pl,Pt,Pl,Pb,WHITE);
    oled.drawLine(Pl,Pb,Pr,Pb,WHITE);
  for (int i=0;i<numPoints-1;i=i+1){
  oled.drawLine(normXdata[i],normYdata[i],normXdata[i+1],normYdata[i+1],WHITE);
  }
}

#include <SPI.h>

#include <Wire.h>

#include <Adafruit_GFX.h>

#include <Adafruit_SSD1306.h>

float rawXdata[128];

int normXdata[128];

float rawYdata[128];

int normYdata[128];

float xMin = 0;

float xMax = 2 * 3.1415;

float yMin = -1;

float yMax = 1;

float Pt = 0;

float Pb = 63;

float Pl = 0;

float Pr = 127;

float pi = 3.14159265;

int numPoints = 128;

int screenWidth = 128;

int screenHeight = 64;

int oledReset = -1;

#define SCREEN_ADDRESS 0x3C

Adafruit_SSD1306 oled(screenWidth, screenHeight, &Wire, oledReset);

int j=0;

void setup() {

// put your setup code here, to run once:

Serial.begin(115200);

oled.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS);

oled.clearDisplay();

oled.display();

}

void loop() {

// put your main code here, to run repeatedly:

for (int i = 0; i < numPoints; i = i + 1) {

rawXdata[i] = i * (2 * pi / 127);

rawYdata[i] = sin(rawXdata[i]);

Serial.println(rawYdata[i]);

delay(100);

}

normData();

plotGraph();

oled.display();

}

void normData() {

for (int i = 0; i < numPoints; i = i + 1) {

normYdata[i] = (Pb - Pt) / (yMin - yMax) * (rawYdata[i] - yMax) + Pt;

normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;

}

void plotGraph(){

oled.drawLine(Pl,Pt,Pl,Pb,WHITE);

oled.drawLine(Pl,Pb,Pr,Pb,WHITE);

for (int i=0;i<numPoints-1;i=i+1){

oled.drawLine(normXdata[i],normYdata[i],normXdata[i+1],normYdata[i+1],WHITE);

}

Python

PyQt Essentials for Absolute Beginners

March 4, 2025 admin

In this Video Lesson we show you how to create a Graphical User Interface to allow you to interact with your python program and hardware projects. The GUI can have buttons, slider bars, radio buttons, drop down menus, and many more widgets. In this lesson we show you how to install the package, and step-by-step instructions on how to use it. For your convenience, here is the code we developed in the lesson.

import sys
from PyQt5.QtWidgets import *
from PyQt5.QtCore import Qt
import time

def greenButtonPressed():
    print("green button clicked")
def yellowButtonPressed():
    print("yellow button clicked")
def redButtonPressed():
    print("red button clicked")
def offButtonPressed():
    print("off button clicked")
def sliderValueChanged(val):
    frequency=val/10
    sliderLabel.setText("Frequency: "+str(frequency)+" Hz")
    print("Frequency: ",frequency)

app = QApplication(sys.argv)
window = QWidget()
window.setWindowTitle("My Grand Widget")
window.setGeometry(100,100,800,600)

widgetBox=QVBoxLayout(window)
buttonBox=QHBoxLayout()

greenButton = QPushButton("Green Button")
greenButton.setStyleSheet("background-color: green; color: white;")
greenButton.clicked.connect(greenButtonPressed)
buttonBox.addWidget(greenButton)

yellowButton = QPushButton("Yellow Button")
yellowButton.setStyleSheet("background-color: yellow; color: black;")
yellowButton.clicked.connect(yellowButtonPressed)
buttonBox.addWidget(yellowButton)

redButton = QPushButton("Red Button")
redButton.setStyleSheet("background-color: red; color: white;")
redButton.clicked.connect(redButtonPressed)
buttonBox.addWidget(redButton)

offButton = QPushButton("Off Button")
offButton.setStyleSheet("background-color: black; color: white;")
offButton.clicked.connect(offButtonPressed)

slider = QSlider(Qt.Horizontal)
slider.setMinimum(1)
slider.setMaximum(40)
slider.setValue(10)
slider.setTickPosition(QSlider.TicksBelow)
slider.setTickInterval(5)
slider.valueChanged.connect(sliderValueChanged)


sliderLabel=QLabel("Frequency: 1.0 HZ")
sliderLabel.setAlignment(Qt.AlignCenter)
sliderLabel.setStyleSheet("font-size: 24px;padding 2px;")

widgetBox.addLayout(buttonBox)
widgetBox.addWidget(sliderLabel)
widgetBox.addWidget(slider)
widgetBox.addStretch()

window.setLayout(widgetBox)
window.show()
sys.exit(app.exec_())

import sys

from PyQt5.QtWidgets import *

from PyQt5.QtCore import Qt

import time

def greenButtonPressed():

print("green button clicked")

def yellowButtonPressed():

print("yellow button clicked")

def redButtonPressed():

print("red button clicked")

def offButtonPressed():

print("off button clicked")

def sliderValueChanged(val):

frequency=val/10

sliderLabel.setText("Frequency: "+str(frequency)+" Hz")

print("Frequency: ",frequency)

app = QApplication(sys.argv)

window = QWidget()

window.setWindowTitle("My Grand Widget")

window.setGeometry(100,100,800,600)

widgetBox=QVBoxLayout(window)

buttonBox=QHBoxLayout()

greenButton = QPushButton("Green Button")

greenButton.setStyleSheet("background-color: green; color: white;")

greenButton.clicked.connect(greenButtonPressed)

buttonBox.addWidget(greenButton)

yellowButton = QPushButton("Yellow Button")

yellowButton.setStyleSheet("background-color: yellow; color: black;")

yellowButton.clicked.connect(yellowButtonPressed)

buttonBox.addWidget(yellowButton)

redButton = QPushButton("Red Button")

redButton.setStyleSheet("background-color: red; color: white;")

redButton.clicked.connect(redButtonPressed)

buttonBox.addWidget(redButton)

offButton = QPushButton("Off Button")

offButton.setStyleSheet("background-color: black; color: white;")

offButton.clicked.connect(offButtonPressed)

slider = QSlider(Qt.Horizontal)

slider.setMinimum(1)

slider.setMaximum(40)

slider.setValue(10)

slider.setTickPosition(QSlider.TicksBelow)

slider.setTickInterval(5)

slider.valueChanged.connect(sliderValueChanged)

sliderLabel=QLabel("Frequency: 1.0 HZ")

sliderLabel.setAlignment(Qt.AlignCenter)

sliderLabel.setStyleSheet("font-size: 24px;padding 2px;")

widgetBox.addLayout(buttonBox)

widgetBox.addWidget(sliderLabel)

widgetBox.addWidget(slider)

widgetBox.addStretch()

window.setLayout(widgetBox)

window.show()

sys.exit(app.exec_())

Arduino

Arduino Weather Barometer

February 27, 2025 admin

In this video lesson we show how to build an Arduino based Weather Barometer. We will use the BMP180 pressure sensor on the GY-87 module. This lesson will likely also work fine if you are just using the BMP180 directly. We show how to measure barometric pressure, convert it to Inches of Mercury, stabilize it with a low pass filter, and then normalize it to standard sea level pressure. With this, our values should very closely match what is being seen on weather maps. This is the schematic of the circuit we will be working on.

For your convenience, here is the code we developed in the video.

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <Adafruit_BMP085.h>

Adafruit_BMP085 BP;
bool BMPconnected = false;

float BarPress = 30;
float BarPressNow = 30;
float alt =  1127;

int screenWidth = 128;
int screenHeight = 64;
int oledReset = -1;
#define SCREEN_ADDRESS 0x3C
Adafruit_SSD1306 oled(screenWidth, screenHeight, &Wire, oledReset);

void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);
  BMPconnected = BP.begin();
  if (BMPconnected == true) {
    Serial.println("BMP180 found and Connected");
  }
  if (BMPconnected == false) {
    Serial.println("BMP180 not found, Check Connections");
  }
  oled.begin(SSD1306_SWITCHCAPVCC,SCREEN_ADDRESS);
  oled.clearDisplay();
  oled.display();
}

void loop() {
  // put your main code here, to run repeatedly:
  BarPressNow = normPress(alt);
  BarPress = .95*BarPress + .05*BarPressNow;
  oled.clearDisplay();
  oled.setCursor(0,12);
  oled.setTextColor(WHITE);
  oled.setTextSize(3);
  oled.println(BarPress);
  oled.println("In HG");
  oled.display();
}

float normPress(float elev){
  float BPRaw;
  float BPNorm;
  float T0 = 288.15;
  float L = .0065 ;
  float R = 8.3144598;
  float M = .0289644;
  float g = 9.8;
  float c = M*g/(R*L);
  BPRaw =BP.readPressure()*.0002953;
  BPNorm = BPRaw/pow(1-L*elev/T0,c);
  return BPNorm;
}

#include <SPI.h>

#include <Wire.h>

#include <Adafruit_GFX.h>

#include <Adafruit_SSD1306.h>

#include <Adafruit_BMP085.h>

Adafruit_BMP085 BP;

bool BMPconnected = false;

float BarPress = 30;

float BarPressNow = 30;

float alt = 1127;

int screenWidth = 128;

int screenHeight = 64;

int oledReset = -1;

#define SCREEN_ADDRESS 0x3C

Adafruit_SSD1306 oled(screenWidth, screenHeight, &Wire, oledReset);

void setup() {

// put your setup code here, to run once:

Serial.begin(9600);

BMPconnected = BP.begin();

if (BMPconnected == true) {

Serial.println("BMP180 found and Connected");

}

if (BMPconnected == false) {

Serial.println("BMP180 not found, Check Connections");

}

oled.begin(SSD1306_SWITCHCAPVCC,SCREEN_ADDRESS);

oled.clearDisplay();

oled.display();

}

void loop() {

// put your main code here, to run repeatedly:

BarPressNow = normPress(alt);

BarPress = .95*BarPress + .05*BarPressNow;

oled.clearDisplay();

oled.setCursor(0,12);

oled.setTextColor(WHITE);

oled.setTextSize(3);

oled.println(BarPress);

oled.println("In HG");

oled.display();

}

float normPress(float elev){

float BPRaw;

float BPNorm;

float T0 = 288.15;

float L = .0065 ;

float R = 8.3144598;

float M = .0289644;

float g = 9.8;

float c = M*g/(R*L);

BPRaw =BP.readPressure()*.0002953;

BPNorm = BPRaw/pow(1-L*elev/T0,c);

return BPNorm;

}

Technology Tutorials

Plotting Live Data in Python Using PyQT

Portable Arduino Barometric Weather Station

Plot any Data or Graph on any OLED

PyQt Essentials for Absolute Beginners

Arduino Weather Barometer

Making The World a Better Place One High Tech Project at a Time. Enjoy!