In this video lesson we show how to build a portable Arduino Weather Station. The station is powered by a battery bank, and data is displayed on the SSD1306 OLED display. The station included the BMP180 pressure sensor for barometric pressure, the DHT 11 for temperature and humidity, and a push button to toggle between modes. The schematic of the circuit is shown below.

When using the breadvolt, or any battery power supply on a breadboard project, do not turn the power supply on while the Arduino is connected to USB, as you could generate voltage conflicts. It is an either or. If the USB is connected, the power supply should be OFF. Or if you are going to connect the USB, first turn off the power supply.

The code developed in the video is included for your convenience below:

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <Adafruit_BMP085.h>

//**********************************************
#include <DHT.h>
#define DHTPIN 11
#define DHTTYPE DHT11
DHT dht(DHTPIN,DHTTYPE);

int butPin=2;
int butVal=0;
int butValOld=0;
int butCount=0;
int butRem=0;

float tempF;
float tempC;
float hum=50;
int hReadTime=0;
int hReadInt=2000;

float humRaw[128];
float normHum[128];
float tempRaw[128];
float normTemp[128];

int lastUpdate = 0;
int updateInterval = 600;

float rawXdata[128];
int normXdata[128];

float rawYdataP[128];
int normYdataP[128];
float rawYdataH[128];
int normYdataH[128];
float rawYdataT[128];
int normYdataT[128];

float xMin = 0;       //************************************
float xMax = 127;

float yMinP = 28;
float yMaxP = 31;
float yMinH=30;
float yMaxH=90;
float yMinT=60;
float yMaxT=90;

float Pt = 14;
float Pb = 63;

float Pl = 0;
float Pr = 127;

int numPoints = 128;

Adafruit_BMP085 BP;
bool BMPconnected = false;

float BarPress = 30;
float BarPressNow = 30;
float alt = 1127;    //****************************

int screenWidth = 128;
int screenHeight = 64;
int oledReset = -1;
#define SCREEN_ADDRESS 0x3C
Adafruit_SSD1306 oled(screenWidth, screenHeight, &Wire, oledReset);

void setup() {
  // put your setup code here, to run once:
  pinMode(butPin,INPUT_PULLUP); //*********************
  Serial.begin(9600);
  BMPconnected = BP.begin();
  if (BMPconnected == true) {
    Serial.println("BMP180 found and Connected");
  }
  if (BMPconnected == false) {
    Serial.println("BMP180 not found, Check Connections");
  }
  oled.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS);
  oled.clearDisplay();
  oled.display();
  for (int i = 0; i < numPoints; i= i + 1) {
    rawXdata[i] = i;
  }
  dht.begin();
  delay(2000);
}

void loop() {
  // put your main code here, to run repeatedly:
  BarPressNow = normPress(alt);
  BarPress = .95 * BarPress + .05 * BarPressNow;  
  tempC=BP.readTemperature();         //***********************
  tempF=tempC*9/5 +32;
  if (millis()-hReadTime>hReadInt){
    hum=dht.readHumidity();
    Serial.println(hum);
    hReadTime=millis();
  }

  if (millis() - lastUpdate >= updateInterval) {
    for (int i = 0; i < numPoints - 1; i = i + 1) {
      rawYdataP[i] = rawYdataP[i + 1];
      rawYdataT[i] = rawYdataT[i + 1];
      rawYdataH[i] = rawYdataH[i + 1];
    }
    lastUpdate=millis();
    rawYdataP[numPoints-1]=BarPress;
    rawYdataT[numPoints-1]=tempF;
    rawYdataH[numPoints-1]=hum;
    //normData();
    //oled.clearDisplay();
    //plotGraph();
  }
  butVal=digitalRead(butPin);
  if (butVal==0 && butValOld==1){
    butCount=butCount+1;
    butRem=butCount%4;
  }
  butValOld=butVal;
  if (butRem==0){
  oled.clearDisplay();
  oled.setCursor(0, 0);
  oled.setTextColor(WHITE);
  oled.setTextSize(2);
  oled.print(tempF);
  oled.println(" F");
  oled.print(hum);
  oled.println(" %Hum");
  oled.print(BarPress);
  oled.println(" InHG");
  oled.display();
  }
  if (butRem==1){
  oled.clearDisplay();
  oled.setCursor(0, 0);
  oled.setTextColor(WHITE);
  oled.setTextSize(2);
  oled.print(BarPress);
  oled.setTextSize(1);
  oled.println(" InHG");
  normDataP();             //***********************
  plotPress();           //***********************
  oled.display();
  delay(.1);
  }
  if (butRem==2){
  oled.clearDisplay();
  oled.setCursor(0, 0);
  oled.setTextColor(WHITE);
  oled.setTextSize(2);
  oled.print(tempF);
  oled.setTextSize(1);
  oled.println(" F");
  normDataT();             //***********************
  plotTemp();           //***********************
  oled.display();
  delay(.1);
  }
  if (butRem==3){
  oled.clearDisplay();
  oled.setCursor(0, 0);
  oled.setTextColor(WHITE);
  oled.setTextSize(2);
  oled.print(hum);
  oled.setTextSize(1);
  oled.println(" %HUM");
  normDataH();             //***********************
  plotHum();           //***********************
  oled.display();
  delay(.1);
  }
}

float normPress(float elev) {
  float BPRaw;
  float BPNorm;
  float T0 = 288.15;
  float L = .0065;
  float R = 8.3144598;
  float M = .0289644;
  float g = 9.8;
  float c = M * g / (R * L);
  BPRaw = BP.readPressure() * .0002953;
  BPNorm = BPRaw / pow(1 - L * elev / T0, c);
  return BPNorm;
}
void normDataP() {
  for (int i = 0; i < numPoints; i = i + 1) {
    normYdataP[i] = (Pb - Pt) / (yMinP - yMaxP) * (rawYdataP[i] - yMaxP) + Pt;
    normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;
  }
}
  void normDataT() {
  for (int i = 0; i < numPoints; i = i + 1) {
    normYdataT[i] = (Pb - Pt) / (yMinT - yMaxT) * (rawYdataT[i] - yMaxT) + Pt;
    normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;
  }
  }
  void normDataH() {
  for (int i = 0; i < numPoints; i = i + 1) {
    normYdataH[i] = (Pb - Pt) / (yMinH - yMaxH) * (rawYdataH[i] - yMaxH) + Pt;
    normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;
  }
}
void plotPress() {                    //plot Pressure
  oled.drawLine(Pl, Pt, Pl, Pb, WHITE);
  oled.drawLine(Pl, Pb, Pr, Pb, WHITE);
  int MID = (Pb - Pt) / (yMinP - yMaxP) * (29.92 - yMaxP) + Pt;    //********** 
  oled.drawLine(Pl, MID, Pr, MID, WHITE);
  for (int i = 0; i < numPoints - 1; i = i + 1) {
    oled.drawLine(normXdata[i], normYdataP[i], normXdata[i + 1], normYdataP[i + 1], WHITE); //***********
  }
}
void plotTemp() {                    //plot Pressure
  oled.drawLine(Pl, Pt, Pl, Pb, WHITE);
  oled.drawLine(Pl, Pb, Pr, Pb, WHITE);
  //int MID = (Pb - Pt) / (yMinP - yMaxP) * (29.92 - yMaxP) + Pt;    //********** 
  //oled.drawLine(Pl, MID, Pr, MID, WHITE);
  for (int i = 0; i < numPoints - 1; i = i + 1) {
    oled.drawLine(normXdata[i], normYdataT[i], normXdata[i + 1], normYdataT[i + 1], WHITE); //***********
  }
}
void plotHum() {                    //plot Pressure
  oled.drawLine(Pl, Pt, Pl, Pb, WHITE);
  oled.drawLine(Pl, Pb, Pr, Pb, WHITE);
  //int MID = (Pb - Pt) / (yMinP - yMaxP) * (29.92 - yMaxP) + Pt;    //********** 
  //oled.drawLine(Pl, MID, Pr, MID, WHITE);
  for (int i = 0; i < numPoints - 1; i = i + 1) {
    oled.drawLine(normXdata[i], normYdataH[i], normXdata[i + 1], normYdataH[i + 1], WHITE); //***********
  }
}

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

#include <SPI.h>

#include <Wire.h>

#include <Adafruit_GFX.h>

#include <Adafruit_SSD1306.h>

#include <Adafruit_BMP085.h>

//**********************************************

#include <DHT.h>

#define DHTPIN 11

#define DHTTYPE DHT11

DHT dht(DHTPIN,DHTTYPE);

int butPin=2;

int butVal=0;

int butValOld=0;

int butCount=0;

int butRem=0;

float tempF;

float tempC;

float hum=50;

int hReadTime=0;

int hReadInt=2000;

float humRaw[128];

float normHum[128];

float tempRaw[128];

float normTemp[128];

int lastUpdate = 0;

int updateInterval = 600;

float rawXdata[128];

int normXdata[128];

float rawYdataP[128];

int normYdataP[128];

float rawYdataH[128];

int normYdataH[128];

float rawYdataT[128];

int normYdataT[128];

float xMin = 0; //************************************

float xMax = 127;

float yMinP = 28;

float yMaxP = 31;

float yMinH=30;

float yMaxH=90;

float yMinT=60;

float yMaxT=90;

float Pt = 14;

float Pb = 63;

float Pl = 0;

float Pr = 127;

int numPoints = 128;

Adafruit_BMP085 BP;

bool BMPconnected = false;

float BarPress = 30;

float BarPressNow = 30;

float alt = 1127; //****************************

int screenWidth = 128;

int screenHeight = 64;

int oledReset = -1;

#define SCREEN_ADDRESS 0x3C

Adafruit_SSD1306 oled(screenWidth, screenHeight, &Wire, oledReset);

void setup() {

// put your setup code here, to run once:

pinMode(butPin,INPUT_PULLUP); //*********************

Serial.begin(9600);

BMPconnected = BP.begin();

if (BMPconnected == true) {

Serial.println("BMP180 found and Connected");

}

if (BMPconnected == false) {

Serial.println("BMP180 not found, Check Connections");

}

oled.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS);

oled.clearDisplay();

oled.display();

for (int i = 0; i < numPoints; i= i + 1) {

rawXdata[i] = i;

}

dht.begin();

delay(2000);

}

void loop() {

// put your main code here, to run repeatedly:

BarPressNow = normPress(alt);

BarPress = .95 * BarPress + .05 * BarPressNow;

tempC=BP.readTemperature(); //***********************

tempF=tempC*9/5 +32;

if (millis()-hReadTime>hReadInt){

hum=dht.readHumidity();

Serial.println(hum);

hReadTime=millis();

}

if (millis() - lastUpdate >= updateInterval) {

for (int i = 0; i < numPoints - 1; i = i + 1) {

rawYdataP[i] = rawYdataP[i + 1];

rawYdataT[i] = rawYdataT[i + 1];

rawYdataH[i] = rawYdataH[i + 1];

}

lastUpdate=millis();

rawYdataP[numPoints-1]=BarPress;

rawYdataT[numPoints-1]=tempF;

rawYdataH[numPoints-1]=hum;

//normData();

//oled.clearDisplay();

//plotGraph();

}

butVal=digitalRead(butPin);

if (butVal==0 && butValOld==1){

butCount=butCount+1;

butRem=butCount%4;

}

butValOld=butVal;

if (butRem==0){

oled.clearDisplay();

oled.setCursor(0, 0);

oled.setTextColor(WHITE);

oled.setTextSize(2);

oled.print(tempF);

oled.println(" F");

oled.print(hum);

oled.println(" %Hum");

oled.print(BarPress);

oled.println(" InHG");

oled.display();

}

if (butRem==1){

oled.clearDisplay();

oled.setCursor(0, 0);

oled.setTextColor(WHITE);

oled.setTextSize(2);

oled.print(BarPress);

oled.setTextSize(1);

oled.println(" InHG");

normDataP(); //***********************

plotPress(); //***********************

oled.display();

delay(.1);

}

if (butRem==2){

oled.clearDisplay();

oled.setCursor(0, 0);

oled.setTextColor(WHITE);

oled.setTextSize(2);

oled.print(tempF);

oled.setTextSize(1);

oled.println(" F");

normDataT(); //***********************

plotTemp(); //***********************

oled.display();

delay(.1);

}

if (butRem==3){

oled.clearDisplay();

oled.setCursor(0, 0);

oled.setTextColor(WHITE);

oled.setTextSize(2);

oled.print(hum);

oled.setTextSize(1);

oled.println(" %HUM");

normDataH(); //***********************

plotHum(); //***********************

oled.display();

delay(.1);

}

float normPress(float elev) {

float BPRaw;

float BPNorm;

float T0 = 288.15;

float L = .0065;

float R = 8.3144598;

float M = .0289644;

float g = 9.8;

float c = M * g / (R * L);

BPRaw = BP.readPressure() * .0002953;

BPNorm = BPRaw / pow(1 - L * elev / T0, c);

return BPNorm;

}

void normDataP() {

for (int i = 0; i < numPoints; i = i + 1) {

normYdataP[i] = (Pb - Pt) / (yMinP - yMaxP) * (rawYdataP[i] - yMaxP) + Pt;

normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;

}

void normDataT() {

for (int i = 0; i < numPoints; i = i + 1) {

normYdataT[i] = (Pb - Pt) / (yMinT - yMaxT) * (rawYdataT[i] - yMaxT) + Pt;

normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;

}

void normDataH() {

for (int i = 0; i < numPoints; i = i + 1) {

normYdataH[i] = (Pb - Pt) / (yMinH - yMaxH) * (rawYdataH[i] - yMaxH) + Pt;

normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;

}

void plotPress() { //plot Pressure

oled.drawLine(Pl, Pt, Pl, Pb, WHITE);

oled.drawLine(Pl, Pb, Pr, Pb, WHITE);

int MID = (Pb - Pt) / (yMinP - yMaxP) * (29.92 - yMaxP) + Pt; //**********

oled.drawLine(Pl, MID, Pr, MID, WHITE);

for (int i = 0; i < numPoints - 1; i = i + 1) {

oled.drawLine(normXdata[i], normYdataP[i], normXdata[i + 1], normYdataP[i + 1], WHITE); //***********

}

void plotTemp() { //plot Pressure

oled.drawLine(Pl, Pt, Pl, Pb, WHITE);

oled.drawLine(Pl, Pb, Pr, Pb, WHITE);

//int MID = (Pb - Pt) / (yMinP - yMaxP) * (29.92 - yMaxP) + Pt; //**********

//oled.drawLine(Pl, MID, Pr, MID, WHITE);

for (int i = 0; i < numPoints - 1; i = i + 1) {

oled.drawLine(normXdata[i], normYdataT[i], normXdata[i + 1], normYdataT[i + 1], WHITE); //***********

}

void plotHum() { //plot Pressure

oled.drawLine(Pl, Pt, Pl, Pb, WHITE);

oled.drawLine(Pl, Pb, Pr, Pb, WHITE);

//int MID = (Pb - Pt) / (yMinP - yMaxP) * (29.92 - yMaxP) + Pt; //**********

//oled.drawLine(Pl, MID, Pr, MID, WHITE);

for (int i = 0; i < numPoints - 1; i = i + 1) {

oled.drawLine(normXdata[i], normYdataH[i], normXdata[i + 1], normYdataH[i + 1], WHITE); //***********

}

Python, Raspberry Pi Pico

Plotting Live Data in Python Using PyQT

March 18, 2025 admin

In this video lesson we show how Live Data can be plotted using a PyQt window. Our eventual goal is to bring in live data from the Raspberry Pi Pico W using UDP over WiFi, but to learn the concepts today, we will be generating a live sin wave to show how the plotting works. Here is the code we developed in this lesson:

import sys
import numpy as np
import pyqtgraph as pg
from PyQt5.QtWidgets import *
from PyQt5.QtCore import *

numPoints = 200
xStart = 0
xStop = 4*np.pi

frequency = 1
Inc = (2*np.pi/numPoints)

count=0
incR=1
incG=2

x=np.linspace(xStart,xStop,numPoints)
ySin=np.sin(frequency*x)
ySin2 = np.sin(frequency*x + 2*np.pi/3)
ySin3 = np.sin(frequency*x + 4*np.pi/3)

def updatePlot():
    global numPoint,xStart,xStop,Inc,frequency,count
    xStart=xStart + Inc
    xStop=xStop + Inc
    x =np.linspace(xStart, xStop , numPoints)
    ySin=np.sin(frequency*x+count*incR/100*frequency)
    ySin2 = np.sin(frequency*x + 2*np.pi/3+count*incG/100*frequency)
    ySin3 = np.sin(frequency*x + 4*np.pi/3)
    
    plotSin.setData(x, ySin)
    plotSin2.setData(x, ySin2)
    plotSin3.setData(x, ySin3)
    
    count=count+1

def updateFrequency(value):
    global frequency, sliderLabel
    frequency = value/10
    sliderLabel.setText("Frequency: "+str(frequency)+" Hz")

app=QApplication(sys.argv)
window = QWidget()
window.setWindowTitle("The Magic of Sin Waves")
window.setGeometry(100,100,800,600)
layout = QVBoxLayout(window)

sliderLabel=QLabel("Frequency: 1 Hz")
sliderLabel.setStyleSheet("font-size: 40px;")
layout.addWidget(sliderLabel)

slider = QSlider(Qt.Horizontal)
slider.setMinimum(1)
slider.setMaximum(40)
slider.setValue(10)
slider.valueChanged.connect(updateFrequency)
layout.addWidget(slider)

graphWidget =pg.PlotWidget()
layout.addWidget(graphWidget)
plotSin=graphWidget.plot(x,ySin,pen=pg.mkPen('r',width=4))
plotSin2=graphWidget.plot(x,ySin2,pen=pg.mkPen('g',width=4))
plotSin3=graphWidget.plot(x,ySin3,pen=pg.mkPen('b',width=4))
graphWidget.setYRange(-1.25,1.25)

timer = QTimer()
timer.timeout.connect(updatePlot)
timer.start(100)

window.setLayout(layout)
window.show()
sys.exit(app.exec_())

import sys

import numpy as np

import pyqtgraph as pg

from PyQt5.QtWidgets import *

from PyQt5.QtCore import *

numPoints = 200

xStart = 0

xStop = 4*np.pi

frequency = 1

Inc = (2*np.pi/numPoints)

count=0

incR=1

incG=2

x=np.linspace(xStart,xStop,numPoints)

ySin=np.sin(frequency*x)

ySin2 = np.sin(frequency*x + 2*np.pi/3)

ySin3 = np.sin(frequency*x + 4*np.pi/3)

def updatePlot():

global numPoint,xStart,xStop,Inc,frequency,count

xStart=xStart + Inc

xStop=xStop + Inc

x =np.linspace(xStart, xStop , numPoints)

ySin=np.sin(frequency*x+count*incR/100*frequency)

ySin2 = np.sin(frequency*x + 2*np.pi/3+count*incG/100*frequency)

ySin3 = np.sin(frequency*x + 4*np.pi/3)

plotSin.setData(x, ySin)

plotSin2.setData(x, ySin2)

plotSin3.setData(x, ySin3)

count=count+1

def updateFrequency(value):

global frequency, sliderLabel

frequency = value/10

sliderLabel.setText("Frequency: "+str(frequency)+" Hz")

app=QApplication(sys.argv)

window = QWidget()

window.setWindowTitle("The Magic of Sin Waves")

window.setGeometry(100,100,800,600)

layout = QVBoxLayout(window)

sliderLabel=QLabel("Frequency: 1 Hz")

sliderLabel.setStyleSheet("font-size: 40px;")

layout.addWidget(sliderLabel)

slider = QSlider(Qt.Horizontal)

slider.setMinimum(1)

slider.setMaximum(40)

slider.setValue(10)

slider.valueChanged.connect(updateFrequency)

layout.addWidget(slider)

graphWidget =pg.PlotWidget()

layout.addWidget(graphWidget)

plotSin=graphWidget.plot(x,ySin,pen=pg.mkPen('r',width=4))

plotSin2=graphWidget.plot(x,ySin2,pen=pg.mkPen('g',width=4))

plotSin3=graphWidget.plot(x,ySin3,pen=pg.mkPen('b',width=4))

graphWidget.setYRange(-1.25,1.25)

timer = QTimer()

timer.timeout.connect(updatePlot)

timer.start(100)

window.setLayout(layout)

window.show()

sys.exit(app.exec_())

Arduino

Portable Arduino Barometric Weather Station

March 13, 2025 admin

In this video lesson we take you through the project of building an Arduino Barometric Pressure Weather Station. It builds on the last two lessons in this series. We measure and display instantaneous Barometric Pressure, normalized to Sea Level. Then in the lower portion on the OLED SSD1306 display, we show a graph of the barometric pressure over the last 24 hours.

Arduino Altimeter — Schematic for the Portable Arduino Barometric Pressure Sensor

When using the breadvolt, or any battery power supply on a breadboard project, do not turn the power supply on while the Raspberry Pi Pico is connected to USB, as you could generate voltage conflicts. It is an either or. If the USB is connected, the power supply should be OFF. Or if you are going to connect the USB, first turn off the power supply.

Below we include the code we develop in the above video. Make sure to set the ‘alt’ variable to your elevation at your location, in meters.

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <Adafruit_BMP085.h>

int lastUpdate = 0;
int updateInterval = 600000;

float rawXdata[128];
int normXdata[128];

float rawYdata[128];
int normYdata[128];

float xMin = 0;
float xMax = 127;

float yMin = 28;
float yMax = 31;

float Pt = 14;
float Pb = 63;

float Pl = 0;
float Pr = 127;

int numPoints = 128;

Adafruit_BMP085 BP;
bool BMPconnected = false;

float BarPress = 30;
float BarPressNow = 30;
float alt = 1127;

int screenWidth = 128;
int screenHeight = 64;
int oledReset = -1;
#define SCREEN_ADDRESS 0x3C
Adafruit_SSD1306 oled(screenWidth, screenHeight, &Wire, oledReset);

void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);
  BMPconnected = BP.begin();
  if (BMPconnected == true) {
    Serial.println("BMP180 found and Connected");
  }
  if (BMPconnected == false) {
    Serial.println("BMP180 not found, Check Connections");
  }
  oled.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS);
  oled.clearDisplay();
  oled.display();
  for (int i = 0; i < numPoints; i= i + 1) {
    rawXdata[i] = i;
  }
}

void loop() {
  // put your main code here, to run repeatedly:
  BarPressNow = normPress(alt);
  BarPress = .95 * BarPress + .05 * BarPressNow;
  if (millis() - lastUpdate >= updateInterval) {
    for (int i = 0; i < numPoints - 1; i = i + 1) {
      rawYdata[i] = rawYdata[i + 1];

    }
    lastUpdate=millis();
    rawYdata[numPoints-1]=BarPress;
    normData();
    oled.clearDisplay();
    plotGraph();
  }
  oled.clearDisplay();
  oled.setCursor(0, 0);
  oled.setTextColor(WHITE);
  oled.setTextSize(2);
  oled.print(BarPress);
  oled.setTextSize(1);
  oled.println(" In HG");
  normData();
  plotGraph();
  oled.display();
  delay(.1);
}

float normPress(float elev) {
  float BPRaw;
  float BPNorm;
  float T0 = 288.15;
  float L = .0065;
  float R = 8.3144598;
  float M = .0289644;
  float g = 9.8;
  float c = M * g / (R * L);
  BPRaw = BP.readPressure() * .0002953;
  BPNorm = BPRaw / pow(1 - L * elev / T0, c);
  return BPNorm;
}
void normData() {
  for (int i = 0; i < numPoints; i = i + 1) {
    normYdata[i] = (Pb - Pt) / (yMin - yMax) * (rawYdata[i] - yMax) + Pt;
    normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;
  }
}
void plotGraph() {
  oled.drawLine(Pl, Pt, Pl, Pb, WHITE);
  oled.drawLine(Pl, Pb, Pr, Pb, WHITE);
  int MID = (Pb - Pt) / (yMin - yMax) * (29.92 - yMax) + Pt;
  oled.drawLine(Pl, MID, Pr, MID, WHITE);
  for (int i = 0; i < numPoints - 1; i = i + 1) {
    oled.drawLine(normXdata[i], normYdata[i], normXdata[i + 1], normYdata[i + 1], WHITE);
  }
}

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

#include <SPI.h>

#include <Wire.h>

#include <Adafruit_GFX.h>

#include <Adafruit_SSD1306.h>

#include <Adafruit_BMP085.h>

int lastUpdate = 0;

int updateInterval = 600000;

float rawXdata[128];

int normXdata[128];

float rawYdata[128];

int normYdata[128];

float xMin = 0;

float xMax = 127;

float yMin = 28;

float yMax = 31;

float Pt = 14;

float Pb = 63;

float Pl = 0;

float Pr = 127;

int numPoints = 128;

Adafruit_BMP085 BP;

bool BMPconnected = false;

float BarPress = 30;

float BarPressNow = 30;

float alt = 1127;

int screenWidth = 128;

int screenHeight = 64;

int oledReset = -1;

#define SCREEN_ADDRESS 0x3C

Adafruit_SSD1306 oled(screenWidth, screenHeight, &Wire, oledReset);

void setup() {

// put your setup code here, to run once:

Serial.begin(9600);

BMPconnected = BP.begin();

if (BMPconnected == true) {

Serial.println("BMP180 found and Connected");

}

if (BMPconnected == false) {

Serial.println("BMP180 not found, Check Connections");

}

oled.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS);

oled.clearDisplay();

oled.display();

for (int i = 0; i < numPoints; i= i + 1) {

rawXdata[i] = i;

}

void loop() {

// put your main code here, to run repeatedly:

BarPressNow = normPress(alt);

BarPress = .95 * BarPress + .05 * BarPressNow;

if (millis() - lastUpdate >= updateInterval) {

for (int i = 0; i < numPoints - 1; i = i + 1) {

rawYdata[i] = rawYdata[i + 1];

}

lastUpdate=millis();

rawYdata[numPoints-1]=BarPress;

normData();

oled.clearDisplay();

plotGraph();

}

oled.clearDisplay();

oled.setCursor(0, 0);

oled.setTextColor(WHITE);

oled.setTextSize(2);

oled.print(BarPress);

oled.setTextSize(1);

oled.println(" In HG");

normData();

plotGraph();

oled.display();

delay(.1);

}

float normPress(float elev) {

float BPRaw;

float BPNorm;

float T0 = 288.15;

float L = .0065;

float R = 8.3144598;

float M = .0289644;

float g = 9.8;

float c = M * g / (R * L);

BPRaw = BP.readPressure() * .0002953;

BPNorm = BPRaw / pow(1 - L * elev / T0, c);

return BPNorm;

}

void normData() {

for (int i = 0; i < numPoints; i = i + 1) {

normYdata[i] = (Pb - Pt) / (yMin - yMax) * (rawYdata[i] - yMax) + Pt;

normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;

}

void plotGraph() {

oled.drawLine(Pl, Pt, Pl, Pb, WHITE);

oled.drawLine(Pl, Pb, Pr, Pb, WHITE);

int MID = (Pb - Pt) / (yMin - yMax) * (29.92 - yMax) + Pt;

oled.drawLine(Pl, MID, Pr, MID, WHITE);

for (int i = 0; i < numPoints - 1; i = i + 1) {

oled.drawLine(normXdata[i], normYdata[i], normXdata[i + 1], normYdata[i + 1], WHITE);

}

Arduino

Plot any Data or Graph on any OLED

March 6, 2025 admin

In this video I show you how you can easily plot any graph or data onto any OLED display. We create a mathematical function which will map the raw data onto the screen. We demonstrate the function with a sin wave, but the function will work with any equation or data. This is the code which we developed in the video.

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

float rawXdata[128];
int normXdata[128];

float rawYdata[128];
int normYdata[128];

float xMin = 0;
float xMax = 2 * 3.1415;

float yMin = -1;
float yMax = 1;

float Pt = 0;
float Pb = 63;

float Pl = 0;
float Pr = 127;

float pi = 3.14159265;

int numPoints = 128;

int screenWidth = 128;
int screenHeight = 64;
int oledReset = -1;
#define SCREEN_ADDRESS 0x3C
Adafruit_SSD1306 oled(screenWidth, screenHeight, &Wire, oledReset);

int j=0;

void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  oled.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS);
  oled.clearDisplay();
  oled.display();
}
void loop() {
  // put your main code here, to run repeatedly:

  for (int i = 0; i < numPoints; i = i + 1) {
    rawXdata[i] = i * (2 * pi / 127);
    rawYdata[i] = sin(rawXdata[i]);
    Serial.println(rawYdata[i]);
    delay(100);
  }
normData();
plotGraph();
oled.display();
}

void normData() {
  for (int i = 0; i < numPoints; i = i + 1) {
    normYdata[i] = (Pb - Pt) / (yMin - yMax) * (rawYdata[i] - yMax) + Pt;
    normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;
  }
}
void plotGraph(){
    oled.drawLine(Pl,Pt,Pl,Pb,WHITE);
    oled.drawLine(Pl,Pb,Pr,Pb,WHITE);
  for (int i=0;i<numPoints-1;i=i+1){
  oled.drawLine(normXdata[i],normYdata[i],normXdata[i+1],normYdata[i+1],WHITE);
  }
}

#include <SPI.h>

#include <Wire.h>

#include <Adafruit_GFX.h>

#include <Adafruit_SSD1306.h>

float rawXdata[128];

int normXdata[128];

float rawYdata[128];

int normYdata[128];

float xMin = 0;

float xMax = 2 * 3.1415;

float yMin = -1;

float yMax = 1;

float Pt = 0;

float Pb = 63;

float Pl = 0;

float Pr = 127;

float pi = 3.14159265;

int numPoints = 128;

int screenWidth = 128;

int screenHeight = 64;

int oledReset = -1;

#define SCREEN_ADDRESS 0x3C

Adafruit_SSD1306 oled(screenWidth, screenHeight, &Wire, oledReset);

int j=0;

void setup() {

// put your setup code here, to run once:

Serial.begin(115200);

oled.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS);

oled.clearDisplay();

oled.display();

}

void loop() {

// put your main code here, to run repeatedly:

for (int i = 0; i < numPoints; i = i + 1) {

rawXdata[i] = i * (2 * pi / 127);

rawYdata[i] = sin(rawXdata[i]);

Serial.println(rawYdata[i]);

delay(100);

}

normData();

plotGraph();

oled.display();

}

void normData() {

for (int i = 0; i < numPoints; i = i + 1) {

normYdata[i] = (Pb - Pt) / (yMin - yMax) * (rawYdata[i] - yMax) + Pt;

normXdata[i] = (Pr - Pl) / (xMax - xMin) * (rawXdata[i] - xMin) + Pl;

}

void plotGraph(){

oled.drawLine(Pl,Pt,Pl,Pb,WHITE);

oled.drawLine(Pl,Pb,Pr,Pb,WHITE);

for (int i=0;i<numPoints-1;i=i+1){

oled.drawLine(normXdata[i],normYdata[i],normXdata[i+1],normYdata[i+1],WHITE);

}

Python

PyQt Essentials for Absolute Beginners

March 4, 2025 admin

In this Video Lesson we show you how to create a Graphical User Interface to allow you to interact with your python program and hardware projects. The GUI can have buttons, slider bars, radio buttons, drop down menus, and many more widgets. In this lesson we show you how to install the package, and step-by-step instructions on how to use it. For your convenience, here is the code we developed in the lesson.

import sys
from PyQt5.QtWidgets import *
from PyQt5.QtCore import Qt
import time

def greenButtonPressed():
    print("green button clicked")
def yellowButtonPressed():
    print("yellow button clicked")
def redButtonPressed():
    print("red button clicked")
def offButtonPressed():
    print("off button clicked")
def sliderValueChanged(val):
    frequency=val/10
    sliderLabel.setText("Frequency: "+str(frequency)+" Hz")
    print("Frequency: ",frequency)

app = QApplication(sys.argv)
window = QWidget()
window.setWindowTitle("My Grand Widget")
window.setGeometry(100,100,800,600)

widgetBox=QVBoxLayout(window)
buttonBox=QHBoxLayout()

greenButton = QPushButton("Green Button")
greenButton.setStyleSheet("background-color: green; color: white;")
greenButton.clicked.connect(greenButtonPressed)
buttonBox.addWidget(greenButton)

yellowButton = QPushButton("Yellow Button")
yellowButton.setStyleSheet("background-color: yellow; color: black;")
yellowButton.clicked.connect(yellowButtonPressed)
buttonBox.addWidget(yellowButton)

redButton = QPushButton("Red Button")
redButton.setStyleSheet("background-color: red; color: white;")
redButton.clicked.connect(redButtonPressed)
buttonBox.addWidget(redButton)

offButton = QPushButton("Off Button")
offButton.setStyleSheet("background-color: black; color: white;")
offButton.clicked.connect(offButtonPressed)

slider = QSlider(Qt.Horizontal)
slider.setMinimum(1)
slider.setMaximum(40)
slider.setValue(10)
slider.setTickPosition(QSlider.TicksBelow)
slider.setTickInterval(5)
slider.valueChanged.connect(sliderValueChanged)


sliderLabel=QLabel("Frequency: 1.0 HZ")
sliderLabel.setAlignment(Qt.AlignCenter)
sliderLabel.setStyleSheet("font-size: 24px;padding 2px;")

widgetBox.addLayout(buttonBox)
widgetBox.addWidget(sliderLabel)
widgetBox.addWidget(slider)
widgetBox.addStretch()

window.setLayout(widgetBox)
window.show()
sys.exit(app.exec_())

import sys

from PyQt5.QtWidgets import *

from PyQt5.QtCore import Qt

import time

def greenButtonPressed():

print("green button clicked")

def yellowButtonPressed():

print("yellow button clicked")

def redButtonPressed():

print("red button clicked")

def offButtonPressed():

print("off button clicked")

def sliderValueChanged(val):

frequency=val/10

sliderLabel.setText("Frequency: "+str(frequency)+" Hz")

print("Frequency: ",frequency)

app = QApplication(sys.argv)

window = QWidget()

window.setWindowTitle("My Grand Widget")

window.setGeometry(100,100,800,600)

widgetBox=QVBoxLayout(window)

buttonBox=QHBoxLayout()

greenButton = QPushButton("Green Button")

greenButton.setStyleSheet("background-color: green; color: white;")

greenButton.clicked.connect(greenButtonPressed)

buttonBox.addWidget(greenButton)

yellowButton = QPushButton("Yellow Button")

yellowButton.setStyleSheet("background-color: yellow; color: black;")

yellowButton.clicked.connect(yellowButtonPressed)

buttonBox.addWidget(yellowButton)

redButton = QPushButton("Red Button")

redButton.setStyleSheet("background-color: red; color: white;")

redButton.clicked.connect(redButtonPressed)

buttonBox.addWidget(redButton)

offButton = QPushButton("Off Button")

offButton.setStyleSheet("background-color: black; color: white;")

offButton.clicked.connect(offButtonPressed)

slider = QSlider(Qt.Horizontal)

slider.setMinimum(1)

slider.setMaximum(40)

slider.setValue(10)

slider.setTickPosition(QSlider.TicksBelow)

slider.setTickInterval(5)

slider.valueChanged.connect(sliderValueChanged)

sliderLabel=QLabel("Frequency: 1.0 HZ")

sliderLabel.setAlignment(Qt.AlignCenter)

sliderLabel.setStyleSheet("font-size: 24px;padding 2px;")

widgetBox.addLayout(buttonBox)

widgetBox.addWidget(sliderLabel)

widgetBox.addWidget(slider)

widgetBox.addStretch()

window.setLayout(widgetBox)

window.show()

sys.exit(app.exec_())

Technology Tutorials

Portable Arduino Weather Station Project

Plotting Live Data in Python Using PyQT

Portable Arduino Barometric Weather Station

Plot any Data or Graph on any OLED

PyQt Essentials for Absolute Beginners

Making The World a Better Place One High Tech Project at a Time. Enjoy!