IP Cameral | Technology Tutorials

OK guys, you spoke, and I listened. You all are asking for a lesson on how to do object detection on a Pi 5 using YOLO and an IP Camera. Well, you are about to get what you asked for. We will make this work, or we will DIE TRYING. Never fear, once you watch the video you will both understand and be able to do it on your own. First, I am assuming you watched our previous lesson where I showed you how to do the basic install and setup of YOLO. If not, never fear, I have the commands below. NOTE: This tutorial is geared towards bookworm OS. I strongly suggest you start with a fresh bookworm SC card, as there are many dependencies, and it is most likely to work if you start exactly where I am starting . . . with a fresh OS. Thes these are the commands I shared last week to get YOLO up and working: (just open a terminal, and paste these commands one at a time)

# 1. Configure X11 (manual steps required)
sudo raspi-config
# → Go to Advanced Options → X11 → Enable X11
# → Finish and reboot when prompted

# 5. Update system and install OpenCV
sudo apt update
sudo apt full-upgrade -y
sudo apt install python3-opencv -y

# Verify OpenCV
python3 -c "import cv2; print('OpenCV version:', cv2.__version__)"
# Expected output: something like "OpenCV version: 4.6.0" or higher

# 6. Install MediaPipe
pip install mediapipe --break

# Verify MediaPipe
python3 -c "import mediapipe as mp; print('MediaPipe version:', mp.__version__)"

# 7. Create and activate virtual environment for YOLO11 (Ultralytics)
python3 -m venv --system-site-packages YOLO
source YOLO/bin/activate

# You are now inside the (YOLO) virtual environment
# Install Ultralytics YOLO11 inside it
pip install "numpy<2.0" ultralytics

# Now create a Pi friendly YOLO11 model
yolo export model=yolo11n.pt format=ncnn

# Optional: Verify YOLO installation
python -c "from ultralytics import YOLO; print('Ultralytics YOLO ready')"

# When finished working with YOLO, you can deactivate with:
# deactivate

#Now open Thonny, and you need to point thonny to the virtual environment you 
#just created. Open tools- options, select 'interpreter' tab, then click they Python
#executable, selecting ... and navigate from home directory, 
#to YOLO, to bin, and then select python

# 1. Configure X11 (manual steps required)

sudo raspi-config

# → Go to Advanced Options → X11 → Enable X11

# → Finish and reboot when prompted

# 5. Update system and install OpenCV

sudo apt update

sudo apt full-upgrade -y

sudo apt install python3-opencv -y

# Verify OpenCV

python3 -c "import cv2; print('OpenCV version:', cv2.__version__)"

# Expected output: something like "OpenCV version: 4.6.0" or higher

# 6. Install MediaPipe

pip install mediapipe --break

# Verify MediaPipe

python3 -c "import mediapipe as mp; print('MediaPipe version:', mp.__version__)"

# 7. Create and activate virtual environment for YOLO11 (Ultralytics)

python3 -m venv --system-site-packages YOLO

source YOLO/bin/activate

# You are now inside the (YOLO) virtual environment

# Install Ultralytics YOLO11 inside it

pip install "numpy<2.0" ultralytics

# Now create a Pi friendly YOLO11 model

yolo export model=yolo11n.pt format=ncnn

# Optional: Verify YOLO installation

python -c "from ultralytics import YOLO; print('Ultralytics YOLO ready')"

# When finished working with YOLO, you can deactivate with:

# deactivate

#Now open Thonny, and you need to point thonny to the virtual environment you

#just created. Open tools- options, select 'interpreter' tab, then click they Python

#executable, selecting ... and navigate from home directory,

#to YOLO, to bin, and then select python

Now, I will explain this code, and will help you configure it for your cameras, but you will need to open up thonny, and paste in the following code as a start. IMPORTANT, as mentioned above, you need to set interpreter in thonny to the virtual environment set up in the process above. If this is not familiar to you, go back and watch last weeks lesson (click previous at the bottom of this post). Without further adue, here is the code we will work with today:

import cv2
from ultralytics import YOLO
#import secret
import threading
import time

W=1280
H=720
RTSP_URL = "rtsp://user:password@192.168.88.44:554/cam/realmonitor?channel=1&subtype=0"
#RTSP_URL = secret.RTSP_URL1
# Load the exported NCNN model (replace with your model path)
model = YOLO("/home/pjm/yolo11n_ncnn_model/", task="detect")
lock = threading.Lock()
running = True
def frameGrabber(url):
    global ipFrame, running
    cap = cv2.VideoCapture(url, cv2.CAP_FFMPEG)
    cap.set(cv2.CAP_PROP_BUFFERSIZE, 1)
    cap.set(cv2.CAP_PROP_POS_FRAMES, 0)  # Reset frame position
    while running:
        ret, frame = cap.read()
        if ret:
            with lock:
                #frame = cv2.resize(frame, (W, H))
                ipFrame = frame.copy()
    cap.release()
    print("Thread Terminated")
thread = threading.Thread(target=frameGrabber, args=(RTSP_URL,), daemon=True)
thread.start()
tStart=time.time()
time.sleep(2)
fps=0
cnt=0
# Set resolution for faster processing (optional, adjust based on your needs)
while True:
    deltaT=time.time()-tStart
    fps= fps*.9 + .1/deltaT
    tStart=time.time()
    with lock:
        ipFrameShow=ipFrame.copy()
    results = model(ipFrameShow, conf=0.25, verbose=False)[0]  # conf: confidence threshold; adjust as needed

    # Annotate the frame with detections (boxes, labels, scores)
    annotatedFrame = results.plot()
    annotatedFrame=cv2.resize(annotatedFrame, (W,H))
    cv2.putText(annotatedFrame, "FPS: "+str(round(fps,1)), (int(W*.01), int(H*.075)), 
            cv2.FONT_HERSHEY_SIMPLEX, H*.002, (0, 0, 255), 3)
    cv2.imshow("IP Camera", annotatedFrame)
    #cv2.moveWindow("IP Camera",100,100)
    if cv2.waitKey(1)==ord('q'):
        break
running=False
thread.join()  # Wait for thread to fully exit
time.sleep(1)
cv2.destroyAllWindows()
import gc
gc.collect()  # Force garbage collection to reclaim memory/connections
print("Program Terminated")

import cv2

from ultralytics import YOLO

#import secret

import threading

import time

W=1280

H=720

RTSP_URL = "rtsp://user:password@192.168.88.44:554/cam/realmonitor?channel=1&subtype=0"

#RTSP_URL = secret.RTSP_URL1

# Load the exported NCNN model (replace with your model path)

model = YOLO("/home/pjm/yolo11n_ncnn_model/", task="detect")

lock = threading.Lock()

running = True

def frameGrabber(url):

global ipFrame, running

cap = cv2.VideoCapture(url, cv2.CAP_FFMPEG)

cap.set(cv2.CAP_PROP_BUFFERSIZE, 1)

cap.set(cv2.CAP_PROP_POS_FRAMES, 0) # Reset frame position

while running:

ret, frame = cap.read()

if ret:

with lock:

#frame = cv2.resize(frame, (W, H))

ipFrame = frame.copy()

cap.release()

print("Thread Terminated")

thread = threading.Thread(target=frameGrabber, args=(RTSP_URL,), daemon=True)

thread.start()

tStart=time.time()

time.sleep(2)

fps=0

cnt=0

# Set resolution for faster processing (optional, adjust based on your needs)

while True:

deltaT=time.time()-tStart

fps= fps*.9 + .1/deltaT

tStart=time.time()

with lock:

ipFrameShow=ipFrame.copy()

results = model(ipFrameShow, conf=0.25, verbose=False)[0] # conf: confidence threshold; adjust as needed

# Annotate the frame with detections (boxes, labels, scores)

annotatedFrame = results.plot()

annotatedFrame=cv2.resize(annotatedFrame, (W,H))

cv2.putText(annotatedFrame, "FPS: "+str(round(fps,1)), (int(W*.01), int(H*.075)),

cv2.FONT_HERSHEY_SIMPLEX, H*.002, (0, 0, 255), 3)

cv2.imshow("IP Camera", annotatedFrame)

#cv2.moveWindow("IP Camera",100,100)

if cv2.waitKey(1)==ord('q'):

break

running=False

thread.join() # Wait for thread to fully exit

time.sleep(1)

cv2.destroyAllWindows()

import gc

gc.collect() # Force garbage collection to reclaim memory/connections

print("Program Terminated")

The video explains everything, please watch it!

Technology Tutorials

Tag Archives: IP Cameral

Object Detection Using YOLO and RTSP Camera on Raspberry Pi 5

Making The World a Better Place One High Tech Project at a Time. Enjoy!