Category Archives: Raspberry Pi Pico

Raspberry Pi Pico PIO State Machine IRQ Interrupts

January 7, 2025 admin

In the video lesson above, we show how to incorporate IRQ interrupts on the Pi Pico PIO State Machines. The state machines will monitor the buttons, watching for button presses. When a button is pressed, an interrupt is set. That interrupt can then be used by that same state machine, a different state machine on the same PIO, or in the main micropython program. Our first example will be to toggle the LED in the main python program, based on the interrupt from the state machine. In the second example, one state machine monitors the button, and the second state machine controls the LED. This is a schematic for the circuit we will be using.

Circuit Schematic for Button Control LED Interrupts

This first code controls the LED from the main python program.

import rp2
from machine import Pin
import time

# Define PIO program for SM0 to trigger an interrupt on button press
@rp2.asm_pio()
def button_irq():
    wrap_target()
    wait(1, pin, 0)  [31]  # Wait for the button press (low signal on GPIO 11)
    nop() [31]
    nop() [31]
    nop() [31]
    nop() [31]
    irq(block, 0)      # Trigger interrupt 0
    wait(0, pin, 0)    # Wait for the button release (high signal on GPIO 11)
    nop() [31]
    nop() [31]
    nop() [31]
    nop() [31]
    wrap()
# Initialize State Machine 0 for the button (GPIO 11)
button_pin = Pin(11, Pin.IN, Pin.PULL_DOWN)
sm_button = rp2.StateMachine(0, button_irq, freq=2000, in_base=button_pin)
# GPIO pin for the LED (GPIO 18)
led_pin = Pin(18, Pin.OUT)
# Interrupt handler for the button press
def button_handler(sm):
    led_pin.value(not led_pin.value())  # Toggle LED state
# Attach the interrupt handler to the State Machine's IRQ
sm_button.irq(button_handler)
# Activate the state machine
sm_button.active(1)

# Keep the program running
while True:
    time.sleep(1)

import rp2

from machine import Pin

import time

# Define PIO program for SM0 to trigger an interrupt on button press

@rp2.asm_pio()

def button_irq():

wrap_target()

wait(1, pin, 0) [31] # Wait for the button press (low signal on GPIO 11)

nop() [31]

irq(block, 0) # Trigger interrupt 0

wait(0, pin, 0) # Wait for the button release (high signal on GPIO 11)

nop() [31]

wrap()

# Initialize State Machine 0 for the button (GPIO 11)

button_pin = Pin(11, Pin.IN, Pin.PULL_DOWN)

sm_button = rp2.StateMachine(0, button_irq, freq=2000, in_base=button_pin)

# GPIO pin for the LED (GPIO 18)

led_pin = Pin(18, Pin.OUT)

# Interrupt handler for the button press

def button_handler(sm):

led_pin.value(not led_pin.value()) # Toggle LED state

# Attach the interrupt handler to the State Machine's IRQ

sm_button.irq(button_handler)

# Activate the state machine

sm_button.active(1)

# Keep the program running

while True:

time.sleep(1)

This next program uses only the state machines. Interrupts and LED control are both done in the state machines.

import rp2
from machine import Pin
import time

@rp2.asm_pio()
def button_irq():
    wrap_target()
    wait(1, pin, 0) [31]
    nop() [31]
    nop() [31]
    nop() [31]
    nop() [31]
    irq(block,0)
    wait(0,pin,0)
    nop() [31]
    nop() [31]
    nop() [31]
    nop() [31]
    wrap()

@rp2.asm_pio(out_init=rp2.PIO.OUT_LOW)
def led_control():
    set(x,0b00000)
    wrap_target()
    wait(1, irq, 0)
    mov(x,invert(x))
    mov(pins,x)
    irq(clear, 0)
    wrap()

button_pin = Pin(11,Pin.IN,Pin.PULL_DOWN)
sm_button=rp2.StateMachine(0,button_irq, freq=2000, in_base=button_pin)

led_pin = Pin(18, Pin.OUT)
sm_led=rp2.StateMachine(1, led_control, freq=2000, out_base=led_pin)
sm_button.active(1)
sm_led.active(1)

import rp2

from machine import Pin

import time

@rp2.asm_pio()

def button_irq():

wrap_target()

wait(1, pin, 0) [31]

nop() [31]

irq(block,0)

wait(0,pin,0)

nop() [31]

wrap()

@rp2.asm_pio(out_init=rp2.PIO.OUT_LOW)

def led_control():

set(x,0b00000)

wrap_target()

wait(1, irq, 0)

mov(x,invert(x))

mov(pins,x)

irq(clear, 0)

wrap()

button_pin = Pin(11,Pin.IN,Pin.PULL_DOWN)

sm_button=rp2.StateMachine(0,button_irq, freq=2000, in_base=button_pin)

led_pin = Pin(18, Pin.OUT)

sm_led=rp2.StateMachine(1, led_control, freq=2000, out_base=led_pin)

sm_button.active(1)

sm_led.active(1)

MicroPython, Raspberry Pi Pico

Control Raspberry Pi Pico PIO State Machines in a Micropython Class

December 24, 2024 admin

In this video lesson we show how you can control a PIO State Machine on the Raspberry Pi Pico W inside of a micropython class. We demonstrate with the practical example of controlling servos with a servo Class which we create. The objective is to ‘hide’ all the complex code in the class, allowing less adept users to interact with the servo with simple python commands. For your convenience the code developed in this video is included below. Enjoy!

import time
from machine import Pin
import rp2
class servoState:
    counter=0
    @rp2.asm_pio(set_init=rp2.PIO.OUT_LOW,out_shiftdir=rp2.PIO.SHIFT_RIGHT)
    def servoSet():
        wrap_target()
        mov(x,osr)
        mov(y,isr)
        set(pins,0)
        label('timeLoop')
        jmp(x_not_y,'nxt')
        set(pins,1)
        label('nxt')
        jmp(y_dec,'timeLoop')    
        wrap()
    
    def __init__(self,servoPin):
        self.sm = rp2.StateMachine(servoState.counter,servoState.servoSet, freq=2000000, set_base=Pin(servoPin))
        self.sm.active(1)
        self.sm.put(20000)
        self.sm.exec("pull()")
        self.sm.exec("mov(isr,osr)")
        print("State Machine: "+str(servoState.counter)+" created")
        servoState.counter=servoState.counter+1
    def servoAngle(self,angle):
        pw=int(500+angle*2000/180)
        self.sm.put(pw)
        self.sm.exec("pull()")
myServo1=servoState(20)
myServo2=servoState(21)
myServo3=servoState(22)
myServo4=servoState(23)
myServo5=servoState(24)
myServo6=servoState(25)
myServo7=servoState(26)
myServo8=servoState(27)
while True:
    for angle in range(0,180,1):
        myServo1.servoAngle(angle)
        myServo7.servoAngle(180-angle)
    time.sleep(5)
    for angle in range(180,0,-1):
        myServo1.servoAngle(angle)
        myServo7.servoAngle(180-angle)
    time.sleep(5)

import time

from machine import Pin

import rp2

class servoState:

counter=0

@rp2.asm_pio(set_init=rp2.PIO.OUT_LOW,out_shiftdir=rp2.PIO.SHIFT_RIGHT)

def servoSet():

wrap_target()

mov(x,osr)

mov(y,isr)

set(pins,0)

label('timeLoop')

jmp(x_not_y,'nxt')

set(pins,1)

label('nxt')

jmp(y_dec,'timeLoop')

wrap()

def __init__(self,servoPin):

self.sm = rp2.StateMachine(servoState.counter,servoState.servoSet, freq=2000000, set_base=Pin(servoPin))

self.sm.active(1)

self.sm.put(20000)

self.sm.exec("pull()")

self.sm.exec("mov(isr,osr)")

print("State Machine: "+str(servoState.counter)+" created")

servoState.counter=servoState.counter+1

def servoAngle(self,angle):

pw=int(500+angle*2000/180)

self.sm.put(pw)

self.sm.exec("pull()")

myServo1=servoState(20)

myServo2=servoState(21)

myServo3=servoState(22)

myServo4=servoState(23)

myServo5=servoState(24)

myServo6=servoState(25)

myServo7=servoState(26)

myServo8=servoState(27)

while True:

for angle in range(0,180,1):

myServo1.servoAngle(angle)

myServo7.servoAngle(180-angle)

time.sleep(5)

for angle in range(180,0,-1):

myServo1.servoAngle(angle)

myServo7.servoAngle(180-angle)

time.sleep(5)

MicroPython, Raspberry Pi Pico

Using Multiple Raspberry Pi Pico PIO State Machines at the Same Time

December 17, 2024 admin

In this video lesson we show how you can work with more than one state machine at the same time in microPython on the Raspberry Pi Pico W. We show this in the context or controlling multiple servos. We show different ways to utilize multiple state machines. For your convenience, we provide the code developed in the video below. Enjoy!

import time
from machine import Pin
import rp2
@rp2.asm_pio(set_init=rp2.PIO.OUT_LOW,out_shiftdir=rp2.PIO.SHIFT_RIGHT)
def servoSet():
    wrap_target()
    mov(x,osr)
    mov(y,isr)
    set(pins,0)
    label('timeLoop')
    jmp(x_not_y,'nxt')
    set(pins,1)
    label('nxt')
    jmp(y_dec,'timeLoop')    
    wrap()
sm0 = rp2.StateMachine(0,servoSet, freq=2000000, set_base=Pin(20))
sm0.active(1)
sm0.put(20000)
sm0.exec("pull()")
sm0.exec("mov(isr,osr)")
sm1 = rp2.StateMachine(1,servoSet, freq=2000000, set_base=Pin(21))
sm1.active(1)
sm1.put(20000)
sm1.exec("pull()")
sm1.exec("mov(isr,osr)")
while True:
    for angle in range(0,180,1):
        pw=int(500+angle*2000/180)
        sm0.put(pw)
        sm0.exec("pull()")
        sm1.put(3000-pw)
        sm1.exec("pull()")
    time.sleep(5)
    for angle in range(180,0,-1):
        pw=int(500+angle*2000/180)
        sm0.put(pw)
        sm0.exec("pull()")
        sm1.put(3000-pw)
        sm1.exec("pull()")

import time

from machine import Pin

import rp2

@rp2.asm_pio(set_init=rp2.PIO.OUT_LOW,out_shiftdir=rp2.PIO.SHIFT_RIGHT)

def servoSet():

wrap_target()

mov(x,osr)

mov(y,isr)

set(pins,0)

label('timeLoop')

jmp(x_not_y,'nxt')

set(pins,1)

label('nxt')

jmp(y_dec,'timeLoop')

wrap()

sm0 = rp2.StateMachine(0,servoSet, freq=2000000, set_base=Pin(20))

sm0.active(1)

sm0.put(20000)

sm0.exec("pull()")

sm0.exec("mov(isr,osr)")

sm1 = rp2.StateMachine(1,servoSet, freq=2000000, set_base=Pin(21))

sm1.active(1)

sm1.put(20000)

sm1.exec("pull()")

sm1.exec("mov(isr,osr)")

while True:

for angle in range(0,180,1):

pw=int(500+angle*2000/180)

sm0.put(pw)

sm0.exec("pull()")

sm1.put(3000-pw)

sm1.exec("pull()")

time.sleep(5)

for angle in range(180,0,-1):

pw=int(500+angle*2000/180)

sm0.put(pw)

sm0.exec("pull()")

sm1.put(3000-pw)

sm1.exec("pull()")

MicroPython, Raspberry Pi Pico

Sweeping Servo Position Using the PIO State Machine on the Raspberry Pi Pico PIO State Machine

December 10, 2024 admin

In this video lesson we show how you can use the Raspberry Pi Pico PIO State Machine to sweep a servo through its full range of motion. The video will take you through things step-by-step. For your convenience the code developed in the video is included below. Enjoy!

import time
from machine import Pin
import rp2
@rp2.asm_pio(set_init=rp2.PIO.OUT_LOW,out_shiftdir=rp2.PIO.SHIFT_RIGHT)
def servoSet():
    wrap_target()
    mov(x,osr)
    mov(y,isr)
    set(pins,0)
    label('timeLoop')
    jmp(x_not_y,'nxt')
    set(pins,1)
    label('nxt')
    jmp(y_dec,'timeLoop')    
    wrap()  
sm0 = rp2.StateMachine(0,servoSet, freq=2000000, set_base=Pin(20))
sm0.active(1)
sm0.put(20000)
sm0.exec("pull()")
sm0.exec("mov(isr,osr)")
while True:
    for angle in range(0,180,1):
        pw=int(500+angle*2000/180)
        sm0.put(pw)
        sm0.exec("pull()")
    time.sleep(5)
    for angle in range(180,0,-1):
        pw=int(500+angle*2000/180)
        sm0.put(pw)
        sm0.exec("pull()")

import time

from machine import Pin

import rp2

@rp2.asm_pio(set_init=rp2.PIO.OUT_LOW,out_shiftdir=rp2.PIO.SHIFT_RIGHT)

def servoSet():

wrap_target()

mov(x,osr)

mov(y,isr)

set(pins,0)

label('timeLoop')

jmp(x_not_y,'nxt')

set(pins,1)

label('nxt')

jmp(y_dec,'timeLoop')

wrap()

sm0 = rp2.StateMachine(0,servoSet, freq=2000000, set_base=Pin(20))

sm0.active(1)

sm0.put(20000)

sm0.exec("pull()")

sm0.exec("mov(isr,osr)")

while True:

for angle in range(0,180,1):

pw=int(500+angle*2000/180)

sm0.put(pw)

sm0.exec("pull()")

time.sleep(5)

for angle in range(180,0,-1):

pw=int(500+angle*2000/180)

sm0.put(pw)

sm0.exec("pull()")

MicroPython, Raspberry Pi Pico

Control Servo Position Using a Raspberry Pi Pico PIO State Machine

December 3, 2024 admin

In this video tutorial we show you how you can use a Raspberry Pi Pico PIO Statemachine to control the position of a servo. For your convenience, the code from this lesson is presented below. Enjoy!

from machine import Pin
import rp2
@rp2.asm_pio(set_init=rp2.PIO.OUT_LOW,out_shiftdir=rp2.PIO.SHIFT_RIGHT)
def servoSet():
    set(x,0b11111)
    in_(x,5)
    set(x,0b0100)
    in_(x,4)
    #set(x,0b00000)
    #in_(x,1)
    mov(osr,isr)
    
    mov(isr,null)
    set(y,0b10011)
    in_(y,5)
    set(y,0b10001)
    in_(y,5)
    set(y,0b00000)
    in_(y,5)
    
    wrap_target()
    mov(x,osr)
    mov(y,isr)
    set(pins,0)
    label('timeLoop')
    jmp(x_not_y,'nxt')
    set(pins,1)
    label('nxt')
    jmp(y_dec,'timeLoop')    
    wrap()
    
sm0 = rp2.StateMachine(0,servoSet, freq=2000000, set_base=Pin(20))
sm0.active(1)

from machine import Pin

import rp2

@rp2.asm_pio(set_init=rp2.PIO.OUT_LOW,out_shiftdir=rp2.PIO.SHIFT_RIGHT)

def servoSet():

set(x,0b11111)

in_(x,5)

set(x,0b0100)

in_(x,4)

#set(x,0b00000)

#in_(x,1)

mov(osr,isr)

mov(isr,null)

set(y,0b10011)

in_(y,5)

set(y,0b10001)

in_(y,5)

set(y,0b00000)

in_(y,5)

wrap_target()

mov(x,osr)

mov(y,isr)

set(pins,0)

label('timeLoop')

jmp(x_not_y,'nxt')

set(pins,1)

label('nxt')

jmp(y_dec,'timeLoop')

wrap()

sm0 = rp2.StateMachine(0,servoSet, freq=2000000, set_base=Pin(20))

sm0.active(1)

Technology Tutorials

Category Archives: Raspberry Pi Pico

Raspberry Pi Pico PIO State Machine IRQ Interrupts

Control Raspberry Pi Pico PIO State Machines in a Micropython Class

Using Multiple Raspberry Pi Pico PIO State Machines at the Same Time

Sweeping Servo Position Using the PIO State Machine on the Raspberry Pi Pico PIO State Machine

Control Servo Position Using a Raspberry Pi Pico PIO State Machine

Making The World a Better Place One High Tech Project at a Time. Enjoy!