This lesson describes how to program the Xbee Series 1 radios. It will work with either the standard Series 1 (S1) or the Series 1 Pro models. The Pro radios are higher power and will give greater range, but they cost more. The radios are configured using X-CTU software, which can be downloaded here. The video gives step by step instructions on how to configure and use the radios to communicate wirelessly over the serial port. Lesson 14 gives information on the hardware needed. Lessons 1-13 sill show you how to communicate between Python and Arduino if you need to get caught up on basic serial communication and interfacing arduino and python. The techniques provided in the video above, however, should work for just about any arduino project where you want to communicate between two arduinos, an arduino and PC, or between two PCs.