Category Archives: Python

In this video lesson we show how to calibrate a QMC5883L 3-Axis magnetometer using python and PyQt5. The program presents the user with a visual representation of the magnetic vector, allowing more precise calibration of the sensors. We are using the GY-87 module, and it is connected like this:

MPU6050 — Schematic for connecting the GY-87 module to the Arduino

This is the simple code on the Arduino side, sending the raw magnetometer data:

#include <Adafruit_MPU6050.h>
#include <Adafruit_Sensor.h>
#include <Wire.h>
#include <QMC5883LCompass.h>
int x,y,z;
Adafruit_MPU6050 mpu;
QMC5883LCompass compass;
void setup() {
Serial.begin(115200);
mpu.begin();
mpu.setI2CBypass(true);
compass.init();
}
void loop() {
 compass.read();
 x = compass.getX();
 y = compass.getY();
 z = compass.getZ();
Serial.print(x);
Serial.print(',');
Serial.print(y);
Serial.print(',');
Serial.println(z);
 delay(100);
}

#include <Adafruit_MPU6050.h>

#include <Adafruit_Sensor.h>

#include <Wire.h>

#include <QMC5883LCompass.h>

int x,y,z;

Adafruit_MPU6050 mpu;

QMC5883LCompass compass;

void setup() {

Serial.begin(115200);

mpu.begin();

mpu.setI2CBypass(true);

compass.init();

}

void loop() {

compass.read();

x = compass.getX();

y = compass.getY();

z = compass.getZ();

Serial.print(x);

Serial.print(',');

Serial.print(y);

Serial.print(',');

Serial.println(z);

delay(100);

}

This is the calibration code, running on the Python side;

import serial
import numpy as np
from PyQt5 import QtWidgets, QtCore
import pyqtgraph as pg
serialPort = 'COM8'
baudRate =115200
to =.1
ser =serial.Serial(serialPort, baudRate, timeout=to)
maxPoints = 2000
xRaw = np.empty(0)
yRaw = np.empty(0)
zRaw = np.empty(0)

xCal = np.empty(0)
yCal = np.empty(0)
zCal = np.empty(0)

calibrated = False
offsets = np.zeros(3)
scales = np.ones(3)

app = QtWidgets.QApplication([])
mainWindow = QtWidgets.QWidget()
mainWindow.setWindowTitle("Magnetometer Calibratioin")
mainLayout =QtWidgets.QVBoxLayout()
mainWindow.setLayout(mainLayout)

statusLabel = QtWidgets.QLabel("Program Running: Not Calibrated")
statusLabel.setAlignment(QtCore.Qt.AlignCenter)
statusLabel.setStyleSheet("color: green; font-weight: bold; font-size: 20px;")
mainLayout.addWidget(statusLabel)

minMaxLabel=QtWidgets.QLabel("Min/Max: N/A")
minMaxLabel.setAlignment(QtCore.Qt.AlignCenter)
minMaxLabel.setStyleSheet("color: green; font-weight: bold; font-size: 16px;")
mainLayout.addWidget(minMaxLabel)

calibrateButton = QtWidgets.QPushButton("Start Calibration")
calibrateButton.setCheckable(True)
mainLayout.addWidget(calibrateButton)


plotLayout =QtWidgets.QGridLayout()
mainLayout.addLayout(plotLayout)
xyPlot = pg.PlotWidget(title="XY Plane")
yzPlot = pg.PlotWidget(title="YZ Plane")
xzPlot = pg.PlotWidget(title="XZ Plane")
for plot in [xyPlot, yzPlot, xzPlot]:
    plot.setAspectLocked(True)
    plot.showGrid(x=True, y=True)
    plot.setMinimumSize(300,300)
plotLayout.addWidget(xyPlot, 0,0)
plotLayout.addWidget(yzPlot, 0,1)
plotLayout.addWidget(xzPlot, 1,0)

xyScatter = pg.ScatterPlotItem(size=5)
yzScatter = pg.ScatterPlotItem(size=5)
xzScatter = pg.ScatterPlotItem(size=5)

xyPlot.addItem(xyScatter)
yzPlot.addItem(yzScatter)
xzPlot.addItem(xzScatter)

def toggleCalibration():
    global calibrated, xRaw, yRaw, zRaw, xCal, yCal, zCal, offsets, scales
    
    if calibrateButton.isChecked():
        calibrateButton.setText("Stop Calibration")
        statusLabel.setText("Mode: Calibration")
        statusLabel.setStyleSheet("color: red; font-weight: bold; font-size: 20px;")
        minMaxLabel.setText("Min/Max: collecting . . .")
        minMaxLabel.setStyleSheet("color: red; font-weight: bold; font-size: 16px;")
        calibrated = False
        xRaw = np.empty(0)
        yRaw = np.empty(0)
        zRaw = np.empty(0)
    if not calibrateButton.isChecked():
        calibrateButton.setText("Start Calibration")
        statusLabel.setText("Mode: Calibrated")
        statusLabel.setStyleSheet("color: green; font-weight: bold; font-size: 20px;")
        
        rawData = np.column_stack((xRaw,yRaw,zRaw))
        minVals = np.min(rawData, axis=0)
        maxVals = np.max(rawData, axis=0)
        offsets = (maxVals + minVals)/2
        scales = 2.0/(maxVals-minVals)
        minMaxLabel.setStyleSheet("color: green; font-weight: bold; font-size: 16px;")
        minMaxLabel.setText("Min(x,y,z: "+str(minVals.round(2))+" Max(x,y,z): "
                            +str(maxVals.round(2))+" Offsets(x,y,z): "+str(offsets.round(2))
                            +"Scales(x,y,z): "+str(scales.round(5)))
        print("Calibration Completed.")
        print("Offsets: ", offsets)
        print("Scales: ", scales)
        
        xCal = np.empty(0)
        yCal = np.empty(0)
        zCal = np.empty(0)
        calibrated = True

calibrateButton.clicked.connect(toggleCalibration)
        
def updatePlot():
    global xRaw, yRaw, zRaw, xCal, yCal, zCal
    if ser.in_waiting > 0:
        try:
            line= ser.readline().decode('utf-8').strip()
            values = line.split(',')
            if len(values)==3:
                x = float(values[0])
                y = float(values[1])
                z = float(values[2])
                if not calibrated:
                    xRaw =np.append(xRaw, x)[-maxPoints:]
                    yRaw =np.append(yRaw, y)[-maxPoints:]
                    zRaw =np.append(zRaw, z)[-maxPoints:]
                    xyScatter.setData(x=xRaw, y=yRaw, brush=pg.mkBrush(0,0,255,255))
                    yzScatter.setData(x=yRaw, y=zRaw, brush=pg.mkBrush(0,255,0,255))
                    xzScatter.setData(x=xRaw, y=zRaw, brush=pg.mkBrush(255,0,0,255))
                    
                    if len(xRaw)>10:
                        minVals = np.min(np.column_stack((xRaw,yRaw,zRaw)),axis=0)
                        maxVals = np.max(np.column_stack((xRaw,yRaw,zRaw)),axis=0)
                        
                        minMaxLabel.setStyleSheet("color: red; font-weight: bold; font-size: 16px;")
                        minMaxLabel.setText("Min(x,y,z: "+str(minVals.round(2))+" Max(x,y,z): "
                            +str(maxVals.round(2)))
                
                if calibrated:
                    xC= (x - offsets[0])*scales[0]
                    yC= (y - offsets[1])*scales[1]
                    zC= (z - offsets[2])*scales[2]
                    
                    xCal = np.append(xCal, xC)[-maxPoints:]
                    yCal = np.append(yCal, yC)[-maxPoints:]
                    zCal = np.append(zCal, zC)[-maxPoints:]
                    
                    xyScatter.setData(x=xCal, y=yCal, brush=pg.mkBrush(0,0,255,120))
                    yzScatter.setData(x=yCal, y=zCal, brush=pg.mkBrush(0,255,0,120))
                    xzScatter.setData(x=xCal, y=zCal, brush=pg.mkBrush(255,0,0,120))             
        
        except Exception as e:
            print("Parse Error: ", e)

plotTimer =QtCore.QTimer()
plotTimer.timeout.connect(updatePlot)
plotTimer.start(50)
mainWindow.show()
try:
    app.exec_()
finally:
    ser.close()

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

import serial

import numpy as np

from PyQt5 import QtWidgets, QtCore

import pyqtgraph as pg

serialPort = 'COM8'

baudRate =115200

to =.1

ser =serial.Serial(serialPort, baudRate, timeout=to)

maxPoints = 2000

xRaw = np.empty(0)

yRaw = np.empty(0)

zRaw = np.empty(0)

xCal = np.empty(0)

yCal = np.empty(0)

zCal = np.empty(0)

calibrated = False

offsets = np.zeros(3)

scales = np.ones(3)

app = QtWidgets.QApplication([])

mainWindow = QtWidgets.QWidget()

mainWindow.setWindowTitle("Magnetometer Calibratioin")

mainLayout =QtWidgets.QVBoxLayout()

mainWindow.setLayout(mainLayout)

statusLabel = QtWidgets.QLabel("Program Running: Not Calibrated")

statusLabel.setAlignment(QtCore.Qt.AlignCenter)

statusLabel.setStyleSheet("color: green; font-weight: bold; font-size: 20px;")

mainLayout.addWidget(statusLabel)

minMaxLabel=QtWidgets.QLabel("Min/Max: N/A")

minMaxLabel.setAlignment(QtCore.Qt.AlignCenter)

minMaxLabel.setStyleSheet("color: green; font-weight: bold; font-size: 16px;")

mainLayout.addWidget(minMaxLabel)

calibrateButton = QtWidgets.QPushButton("Start Calibration")

calibrateButton.setCheckable(True)

mainLayout.addWidget(calibrateButton)

plotLayout =QtWidgets.QGridLayout()

mainLayout.addLayout(plotLayout)

xyPlot = pg.PlotWidget(title="XY Plane")

yzPlot = pg.PlotWidget(title="YZ Plane")

xzPlot = pg.PlotWidget(title="XZ Plane")

for plot in [xyPlot, yzPlot, xzPlot]:

plot.setAspectLocked(True)

plot.showGrid(x=True, y=True)

plot.setMinimumSize(300,300)

plotLayout.addWidget(xyPlot, 0,0)

plotLayout.addWidget(yzPlot, 0,1)

plotLayout.addWidget(xzPlot, 1,0)

xyScatter = pg.ScatterPlotItem(size=5)

yzScatter = pg.ScatterPlotItem(size=5)

xzScatter = pg.ScatterPlotItem(size=5)

xyPlot.addItem(xyScatter)

yzPlot.addItem(yzScatter)

xzPlot.addItem(xzScatter)

def toggleCalibration():

global calibrated, xRaw, yRaw, zRaw, xCal, yCal, zCal, offsets, scales

if calibrateButton.isChecked():

calibrateButton.setText("Stop Calibration")

statusLabel.setText("Mode: Calibration")

statusLabel.setStyleSheet("color: red; font-weight: bold; font-size: 20px;")

minMaxLabel.setText("Min/Max: collecting . . .")

minMaxLabel.setStyleSheet("color: red; font-weight: bold; font-size: 16px;")

calibrated = False

xRaw = np.empty(0)

yRaw = np.empty(0)

zRaw = np.empty(0)

if not calibrateButton.isChecked():

calibrateButton.setText("Start Calibration")

statusLabel.setText("Mode: Calibrated")

statusLabel.setStyleSheet("color: green; font-weight: bold; font-size: 20px;")

rawData = np.column_stack((xRaw,yRaw,zRaw))

minVals = np.min(rawData, axis=0)

maxVals = np.max(rawData, axis=0)

offsets = (maxVals + minVals)/2

scales = 2.0/(maxVals-minVals)

minMaxLabel.setStyleSheet("color: green; font-weight: bold; font-size: 16px;")

minMaxLabel.setText("Min(x,y,z: "+str(minVals.round(2))+" Max(x,y,z): "

+str(maxVals.round(2))+" Offsets(x,y,z): "+str(offsets.round(2))

+"Scales(x,y,z): "+str(scales.round(5)))

print("Calibration Completed.")

print("Offsets: ", offsets)

print("Scales: ", scales)

xCal = np.empty(0)

yCal = np.empty(0)

zCal = np.empty(0)

calibrated = True

calibrateButton.clicked.connect(toggleCalibration)

def updatePlot():

global xRaw, yRaw, zRaw, xCal, yCal, zCal

if ser.in_waiting > 0:

try:

line= ser.readline().decode('utf-8').strip()

values = line.split(',')

if len(values)==3:

x = float(values[0])

y = float(values[1])

z = float(values[2])

if not calibrated:

xRaw =np.append(xRaw, x)[-maxPoints:]

yRaw =np.append(yRaw, y)[-maxPoints:]

zRaw =np.append(zRaw, z)[-maxPoints:]

xyScatter.setData(x=xRaw, y=yRaw, brush=pg.mkBrush(0,0,255,255))

yzScatter.setData(x=yRaw, y=zRaw, brush=pg.mkBrush(0,255,0,255))

xzScatter.setData(x=xRaw, y=zRaw, brush=pg.mkBrush(255,0,0,255))

if len(xRaw)>10:

minVals = np.min(np.column_stack((xRaw,yRaw,zRaw)),axis=0)

maxVals = np.max(np.column_stack((xRaw,yRaw,zRaw)),axis=0)

minMaxLabel.setStyleSheet("color: red; font-weight: bold; font-size: 16px;")

minMaxLabel.setText("Min(x,y,z: "+str(minVals.round(2))+" Max(x,y,z): "

+str(maxVals.round(2)))

if calibrated:

xC= (x - offsets[0])*scales[0]

yC= (y - offsets[1])*scales[1]

zC= (z - offsets[2])*scales[2]

xCal = np.append(xCal, xC)[-maxPoints:]

yCal = np.append(yCal, yC)[-maxPoints:]

zCal = np.append(zCal, zC)[-maxPoints:]

xyScatter.setData(x=xCal, y=yCal, brush=pg.mkBrush(0,0,255,120))

yzScatter.setData(x=yCal, y=zCal, brush=pg.mkBrush(0,255,0,120))

xzScatter.setData(x=xCal, y=zCal, brush=pg.mkBrush(255,0,0,120))

except Exception as e:

print("Parse Error: ", e)

plotTimer =QtCore.QTimer()

plotTimer.timeout.connect(updatePlot)

plotTimer.start(50)

mainWindow.show()

try:

app.exec_()

finally:

ser.close()

Python, Raspberry Pi Pico

Python Program to Calculate Distance and Heading Between Two GPS Points Using Haversine Formula

September 2, 2025 admin

In this video lesson we will develop a python program to calculate the distance and heading between any two GPs positions on earth. The equations we will be coding up are below:

The code which we developed is:

import math
earthRadius = 6371000
def calculateDistance(lat1,lon1,lat2,lon2):
    lat1=lat1*2*math.pi/360
    lon1=lon1*2*math.pi/360
    lat2=lat2*2*math.pi/360
    lon2=lon2*2*math.pi/360
    theta = 2*math.asin(math.sqrt(
        math.sin((lat2-lat1)/2)**2 +
        math.cos(lat1)*math.cos(lat2)*math.sin((lon2-lon1)/2)**2
        ))
    distance = earthRadius * theta
    return distance
def calculateHeading(lat1,lon1,lat2,lon2):
    lat1=lat1*2*math.pi/360
    lon1=lon1*2*math.pi/360
    lat2=lat2*2*math.pi/360
    lon2=lon2*2*math.pi/360
    deltaLon=lon2-lon1
    xC=math.sin(deltaLon)*math.cos(lat2)
    yC=math.cos(lat1)*math.sin(lat2)-math.sin(lat1)*math.cos(lat2)*math.cos(deltaLon)
    beta = math.atan2(xC,yC)
    betaDeg = beta*360/2/math.pi
    return betaDeg

print("Enter Coordinates in Degrees")
lat1= float(input("lat1? "))
lon1= float(input("lon1? "))
lat2= float(input("lat2? "))
lon2= float(input("lon2? "))

distance = calculateDistance(lat1,lon1,lat2,lon2)
heading = calculateHeading(lat1,lon1,lat2,lon2)
print("REPORT: ")
print("Distance = ",distance)
print("Heading = ",heading)

import math

earthRadius = 6371000

def calculateDistance(lat1,lon1,lat2,lon2):

lat1=lat1*2*math.pi/360

lon1=lon1*2*math.pi/360

lat2=lat2*2*math.pi/360

lon2=lon2*2*math.pi/360

theta = 2*math.asin(math.sqrt(

math.sin((lat2-lat1)/2)**2 +

math.cos(lat1)*math.cos(lat2)*math.sin((lon2-lon1)/2)**2

))

distance = earthRadius * theta

return distance

def calculateHeading(lat1,lon1,lat2,lon2):

lat1=lat1*2*math.pi/360

lon1=lon1*2*math.pi/360

lat2=lat2*2*math.pi/360

lon2=lon2*2*math.pi/360

deltaLon=lon2-lon1

xC=math.sin(deltaLon)*math.cos(lat2)

yC=math.cos(lat1)*math.sin(lat2)-math.sin(lat1)*math.cos(lat2)*math.cos(deltaLon)

beta = math.atan2(xC,yC)

betaDeg = beta*360/2/math.pi

return betaDeg

print("Enter Coordinates in Degrees")

lat1= float(input("lat1? "))

lon1= float(input("lon1? "))

lat2= float(input("lat2? "))

lon2= float(input("lon2? "))

distance = calculateDistance(lat1,lon1,lat2,lon2)

heading = calculateHeading(lat1,lon1,lat2,lon2)

print("REPORT: ")

print("Distance = ",distance)

print("Heading = ",heading)

Arduino, Python

Controlling Brightness of Arduino LED Remotely Using PyQt and WiFi

June 25, 2025 admin

In this lesson we will use PyQt5, UDP and WiFi to control the brightness of an Arduino LED circuit remotely. The PyQt generates a constantly updating sin wave, which it plots on a PyQt graph, and then transfers the brightness in real time to the arduino project. This lesson teaches many important skills including UDP, WiFi, PyQt5, Python, Arduino and LEDs.

When using the breadvolt, or any battery power supply on a breadboard project, do not turn the power supply on while the Arduino is connected to USB, as you could generate voltage conflicts. It is an either or. If the USB is connected, the power supply should be OFF. The schematic for the arduino circuit is shown below:

Schematic of our Arduino Uno R4 Wifi connected to an RGB LED

In the video, we develop code for the server, on the arduino, and the client, running in Python on the desktop. We present the code below for your convenience.

This is the Server code for the Arduino:

#include <WiFiS3.h>
#include "secrets.h"
WiFiUDP udp;
int PORT = 12345;
String myString;
String stringArray[10];
String response = "ACK";
int redPin=9;
void setup() {
  Serial.begin(9600);
  pinMode(redPin,OUTPUT);
  Serial.print("Connecting to ");
  Serial.println(mySSID);
  WiFi.begin(mySSID, myPASS);
  while (WiFi.status() != WL_CONNECTED) {
    delay(100);
    Serial.print(".");
  }
  Serial.println("\nConnected to WiFi");
  Serial.println(WiFi.localIP());
  udp.begin(PORT);
  Serial.print("UDP Server started on port ");
  Serial.print(PORT);
  // put your setup code here, to run once:
}
void splitString() {
  int startIndex = 0;
  int indexCount = 0;
  int i;
  int j;
  myString = myString + ':';
  for (i = 0; i < myString.length(); i = i + 1) {
    if (myString[i] == ':') {
      stringArray[indexCount] = myString.substring(startIndex, i);
      indexCount = indexCount + 1;
      startIndex = i + 1;
    }
  }
}

void loop() {
  // put your main code here, to run repeatedly:
  if (udp.parsePacket()) {
    myString = udp.readStringUntil('\n');
    splitString();
    analogWrite(redPin,stringArray[0].toInt());
  }
}

#include <WiFiS3.h>

#include "secrets.h"

WiFiUDP udp;

int PORT = 12345;

String myString;

String stringArray[10];

String response = "ACK";

int redPin=9;

void setup() {

Serial.begin(9600);

pinMode(redPin,OUTPUT);

Serial.print("Connecting to ");

Serial.println(mySSID);

WiFi.begin(mySSID, myPASS);

while (WiFi.status() != WL_CONNECTED) {

delay(100);

Serial.print(".");

}

Serial.println("\nConnected to WiFi");

Serial.println(WiFi.localIP());

udp.begin(PORT);

Serial.print("UDP Server started on port ");

Serial.print(PORT);

// put your setup code here, to run once:

}

void splitString() {

int startIndex = 0;

int indexCount = 0;

int i;

int j;

myString = myString + ':';

for (i = 0; i < myString.length(); i = i + 1) {

if (myString[i] == ':') {

stringArray[indexCount] = myString.substring(startIndex, i);

indexCount = indexCount + 1;

startIndex = i + 1;

}

void loop() {

// put your main code here, to run repeatedly:

if (udp.parsePacket()) {

myString = udp.readStringUntil('\n');

splitString();

analogWrite(redPin,stringArray[0].toInt());

}

You will need to open a new tab, and save the following code as “secrets.h” with the program above.

#define mySSID "Your WiFi Name"
#define myPASS "Your WiFi Password"

1 2	#define mySSID "Your WiFi Name" #define myPASS "Your WiFi Password"

On the Python side, this is the Client code:

import pyqtgraph as pg
from PyQt5.QtWidgets import *
from PyQt5.QtCore import *
from PyQt5.QtGui import QGuiApplication
import sys
from math import sin,pi
import time
import socket
 
# Arduino’s IP address (from Arduino Serial Monitor)
HOST = "192.168.88.120"  # Use Your Arduino's IP. It will print when
                        #You Run the Arduino Server Program
PORT = 12345            # Must match Arduino’s UDP port
 
# Create a UDP socket
mySocket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
mySocket.settimeout(5.0)  # 5 seconds timeout for responses

Period = 5
frequency = 1/Period
numPoints = 500
timeStep = Period/numPoints
redData = [0]*numPoints
timeData =[0]*numPoints

app = QApplication([])
window = QMainWindow()
window.setWindowTitle("Red Sine Wave Graph")
window.setGeometry(100,100,800,600)

screens =QGuiApplication.screens()
window.move(screens[1].geometry().x() +100,screens[1].geometry().y() +100)

widgetContainer =QWidget()
window.setCentralWidget(widgetContainer)

mainLayout = QVBoxLayout(widgetContainer)

plotWidget = pg.PlotWidget()
plotWidget.setLabel("left", "y=sin(2*Pi*f*t")
plotWidget.setLabel("bottom", "Time (s)")
plotWidget.setTitle("My Fine Sin Wave")
plotWidget.addLegend()
mainLayout.addWidget(plotWidget)

for i in range(numPoints):
    t = i * timeStep
    timeData[i] = t
    redData[i] = sin(2*pi*frequency*t)

redPlot = plotWidget.plot(timeData,redData, pen=pg.mkPen("r", width=3), name="Red")
tStart = time.perf_counter()
def updateGraph():
    global t,tStart,frequency
    t = t +timeStep
    r= sin(2*pi*frequency*t)
    redWrite = int((r*255 + 255)/2)
    myData= str(redWrite)+'\n'
    myDataEncoded=myData.encode()
    mySocket.sendto(myDataEncoded, (HOST,PORT))
    for i in range(numPoints -1):
        redData[i] = redData[i+1]
        timeData[i] = timeData[i+1]
    redData[numPoints - 1] = r
    timeData[numPoints -1] = t
    redPlot.setData(timeData,redData)
    if redData[0] <=0 and redData[1] > 0:
        measuredPeriod = time.perf_counter() - tStart
        print("Measured Period: ",measuredPeriod)
        tStart = time.perf_counter()

timer = QTimer()
timer.timeout.connect(updateGraph)
timer.start(int(timeStep*1000))

window.show()
sys.exit(app.exec_())

import pyqtgraph as pg

from PyQt5.QtWidgets import *

from PyQt5.QtCore import *

from PyQt5.QtGui import QGuiApplication

import sys

from math import sin,pi

import time

import socket

# Arduino’s IP address (from Arduino Serial Monitor)

HOST = "192.168.88.120" # Use Your Arduino's IP. It will print when

#You Run the Arduino Server Program

PORT = 12345 # Must match Arduino’s UDP port

# Create a UDP socket

mySocket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)

mySocket.settimeout(5.0) # 5 seconds timeout for responses

Period = 5

frequency = 1/Period

numPoints = 500

timeStep = Period/numPoints

redData = [0]*numPoints

timeData =[0]*numPoints

app = QApplication([])

window = QMainWindow()

window.setWindowTitle("Red Sine Wave Graph")

window.setGeometry(100,100,800,600)

screens =QGuiApplication.screens()

window.move(screens[1].geometry().x() +100,screens[1].geometry().y() +100)

widgetContainer =QWidget()

window.setCentralWidget(widgetContainer)

mainLayout = QVBoxLayout(widgetContainer)

plotWidget = pg.PlotWidget()

plotWidget.setLabel("left", "y=sin(2*Pi*f*t")

plotWidget.setLabel("bottom", "Time (s)")

plotWidget.setTitle("My Fine Sin Wave")

plotWidget.addLegend()

mainLayout.addWidget(plotWidget)

for i in range(numPoints):

t = i * timeStep

timeData[i] = t

redData[i] = sin(2*pi*frequency*t)

redPlot = plotWidget.plot(timeData,redData, pen=pg.mkPen("r", width=3), name="Red")

tStart = time.perf_counter()

def updateGraph():

global t,tStart,frequency

t = t +timeStep

r= sin(2*pi*frequency*t)

redWrite = int((r*255 + 255)/2)

myData= str(redWrite)+'\n'

myDataEncoded=myData.encode()

mySocket.sendto(myDataEncoded, (HOST,PORT))

for i in range(numPoints -1):

redData[i] = redData[i+1]

timeData[i] = timeData[i+1]

redData[numPoints - 1] = r

timeData[numPoints -1] = t

redPlot.setData(timeData,redData)

if redData[0] <=0 and redData[1] > 0:

measuredPeriod = time.perf_counter() - tStart

print("Measured Period: ",measuredPeriod)

tStart = time.perf_counter()

timer = QTimer()

timer.timeout.connect(updateGraph)

timer.start(int(timeStep*1000))

window.show()

sys.exit(app.exec_())

Arduino, Python

Plot Live Data in Python Using PyQt5

June 18, 2025 admin

In this video lesson we show you how to plot live data in Python using PyQt5. In this lesson, we generate the data in python on the fly, but in future lessons we will bring the data in from the Arduino Project over WiFi using UDP. For your convenience, the code we developed in this lesson is below:

import pyqtgraph as pg
from PyQt5.QtWidgets import *
from PyQt5.QtCore import *
from PyQt5.QtGui import QGuiApplication
import sys
from math import sin,pi
import time

Period = 5
frequency = 1/Period
numPoints = 500
timeStep = Period/numPoints
redData = [0]*numPoints
timeData =[0]*numPoints

app = QApplication([])
window = QMainWindow()
window.setWindowTitle("Red Sine Wave Graph")
window.setGeometry(100,100,800,600)

#screens =QGuiApplication.screens()
#window.move(screens[1].geometry().x() +100,screens[1].geometry().y() +100)

widgetContainer =QWidget()
window.setCentralWidget(widgetContainer)

mainLayout = QVBoxLayout(widgetContainer)

plotWidget = pg.PlotWidget()
plotWidget.setLabel("left", "y=sin(2*Pi*f*t")
plotWidget.setLabel("bottom", "Time (s)")
plotWidget.setTitle("My Fine Sin Wave")
plotWidget.addLegend()
mainLayout.addWidget(plotWidget)

for i in range(numPoints):
    t = i * timeStep
    timeData[i] = t
    redData[i] = sin(2*pi*frequency*t)

redPlot = plotWidget.plot(timeData,redData, pen=pg.mkPen("r", width=3), name="Red")
tStart = time.perf_counter()
def updateGraph():
    global t,tStart,frequency
    t = t +timeStep
    r= sin(2*pi*frequency*t)
    for i in range(numPoints -1):
        redData[i] = redData[i+1]
        timeData[i] = timeData[i+1]
    redData[numPoints - 1] = r
    timeData[numPoints -1] = t
    redPlot.setData(timeData,redData)
    if redData[0] <=0 and redData[1] > 0:
        measuredPeriod = time.perf_counter() - tStart
        print("Measured Period: ",measuredPeriod)
        tStart = time.perf_counter()

timer = QTimer()
timer.timeout.connect(updateGraph)
timer.start(int(timeStep*1000))

window.show()
sys.exit(app.exec_())

import pyqtgraph as pg

from PyQt5.QtWidgets import *

from PyQt5.QtCore import *

from PyQt5.QtGui import QGuiApplication

import sys

from math import sin,pi

import time

Period = 5

frequency = 1/Period

numPoints = 500

timeStep = Period/numPoints

redData = [0]*numPoints

timeData =[0]*numPoints

app = QApplication([])

window = QMainWindow()

window.setWindowTitle("Red Sine Wave Graph")

window.setGeometry(100,100,800,600)

#screens =QGuiApplication.screens()

#window.move(screens[1].geometry().x() +100,screens[1].geometry().y() +100)

widgetContainer =QWidget()

window.setCentralWidget(widgetContainer)

mainLayout = QVBoxLayout(widgetContainer)

plotWidget = pg.PlotWidget()

plotWidget.setLabel("left", "y=sin(2*Pi*f*t")

plotWidget.setLabel("bottom", "Time (s)")

plotWidget.setTitle("My Fine Sin Wave")

plotWidget.addLegend()

mainLayout.addWidget(plotWidget)

for i in range(numPoints):

t = i * timeStep

timeData[i] = t

redData[i] = sin(2*pi*frequency*t)

redPlot = plotWidget.plot(timeData,redData, pen=pg.mkPen("r", width=3), name="Red")

tStart = time.perf_counter()

def updateGraph():

global t,tStart,frequency

t = t +timeStep

r= sin(2*pi*frequency*t)

for i in range(numPoints -1):

redData[i] = redData[i+1]

timeData[i] = timeData[i+1]

redData[numPoints - 1] = r

timeData[numPoints -1] = t

redPlot.setData(timeData,redData)

if redData[0] <=0 and redData[1] > 0:

measuredPeriod = time.perf_counter() - tStart

print("Measured Period: ",measuredPeriod)

tStart = time.perf_counter()

timer = QTimer()

timer.timeout.connect(updateGraph)

timer.start(int(timeStep*1000))

window.show()

sys.exit(app.exec_())

Arduino, Python

Use PyQt5 to Create a Graphical User Interface for Arduino Project Over WiFi

May 22, 2025 admin

In this video lesson we introduce you to creating Graphical User Interfaces (GUI) to control your arduino project over WiFi using PyQt5. For this first introduction, we show you how to create the PyQt5 Widget on your PC using Python. Then your homework will be to control your arduino using the widget over WiFi. For your convenience, the code we developed in the lesson is presented below.

from PyQt5.QtWidgets import *
from PyQt5.QtCore import *
import sys

app = QApplication([])

window = QMainWindow()
window.setWindowTitle('Welcome to GUI World')
window.setGeometry(100,100,500,300)

widgetContainer = QWidget()
window.setCentralWidget(widgetContainer)
mainLayout = QVBoxLayout(widgetContainer)

label = QLabel("Welcome to PyQt5!")
label.setAlignment(Qt.AlignCenter)
label.setStyleSheet("font-size: 24px; color: blue; padding: 10px;")
label.setFixedHeight(50)
mainLayout.addWidget(label)

pushButtonLayout = QHBoxLayout()
mainLayout.addLayout(pushButtonLayout)

pushButtonRed = QPushButton("Blink Red!")
pushButtonRed.setStyleSheet("background-color: red; color: white; font-size: 24px; padding:10;")
pushButtonRed.setFixedSize(150,50)
def pushButtonRedClicked():
    label.setText("Blink Red!")
    label.setStyleSheet(" font-size: 24px;color: red; padding:10;")
pushButtonRed.clicked.connect(pushButtonRedClicked)
pushButtonLayout.addWidget(pushButtonRed)

pushButtonGreen = QPushButton("Blink Green!")
pushButtonGreen.setStyleSheet("background-color: green; color: white; font-size: 24px; padding:10;")
pushButtonGreen.setFixedSize(150,50)
def pushButtonGreenClicked():
    label.setText("Blink Green!")
    label.setStyleSheet(" font-size: 24px;color: green; padding:10;")
pushButtonGreen.clicked.connect(pushButtonGreenClicked)
pushButtonLayout.addWidget(pushButtonGreen)

pushButtonBlue = QPushButton("Blink Blue!")
pushButtonBlue.setStyleSheet("background-color: blue; color: white; font-size: 24px; padding:10;")
pushButtonBlue.setFixedSize(150,50)
def pushButtonBlueClicked():
    label.setText("Blink Blue!")
    label.setStyleSheet(" font-size: 24px;color: blue; padding:10;")
pushButtonBlue.clicked.connect(pushButtonBlueClicked)
pushButtonLayout.addWidget(pushButtonBlue)

toggleButtonLayout = QHBoxLayout()
mainLayout.addLayout(toggleButtonLayout)


toggleButtonRed = QPushButton("Toggle Red")
toggleButtonRed.setCheckable(True)
toggleButtonRed.setStyleSheet("background-color: red; color: white; font-size: 18px; padding:10;")
toggleButtonRed.setFixedSize(150,50)
def toggleRed(checked):
    if checked:
        label.setText("Red Toggle ON")
        label.setStyleSheet(" font-size: 24px;color: red; padding:10;")
        
    if not checked:
        label.setText("Red Toggle OFF")
        label.setStyleSheet(" font-size: 24px;color: red; padding:10;")

toggleButtonRed.toggled.connect(toggleRed)
toggleButtonLayout.addWidget(toggleButtonRed)

toggleButtonGreen = QPushButton("Toggle Green")
toggleButtonGreen.setCheckable(True)
toggleButtonGreen.setStyleSheet("background-color: green; color: white; font-size: 18px; padding:10;")
toggleButtonGreen.setFixedSize(150,50)
def toggleGreen(checked):
    if checked:
        label.setText("Green Toggle ON")
        label.setStyleSheet(" font-size: 24px;color: green; padding:10;")
        
    if not checked:
        label.setText("Green Toggle OFF")
        label.setStyleSheet(" font-size: 24px;color: green; padding:10;")

toggleButtonGreen.toggled.connect(toggleGreen)
toggleButtonLayout.addWidget(toggleButtonGreen)

toggleButtonBlue = QPushButton("Toggle Blue")
toggleButtonBlue.setCheckable(True)
toggleButtonBlue.setStyleSheet("background-color: blue; color: white; font-size: 18px; padding:10;")
toggleButtonBlue.setFixedSize(150,50)
def toggleBlue(checked):
    if checked:
        label.setText("Blue Toggle ON")
        label.setStyleSheet(" font-size: 24px;color: blue; padding:10;")
        
    if not checked:
        label.setText("Blue Toggle OFF")
        label.setStyleSheet(" font-size: 24px;color: bllue; padding:10;")

toggleButtonBlue.toggled.connect(toggleBlue)
toggleButtonLayout.addWidget(toggleButtonBlue)

mainLayout.addStretch()
window.show()
sys.exit(app.exec_())

100

101

102

103

104

105

from PyQt5.QtWidgets import *

from PyQt5.QtCore import *

import sys

app = QApplication([])

window = QMainWindow()

window.setWindowTitle('Welcome to GUI World')

window.setGeometry(100,100,500,300)

widgetContainer = QWidget()

window.setCentralWidget(widgetContainer)

mainLayout = QVBoxLayout(widgetContainer)

label = QLabel("Welcome to PyQt5!")

label.setAlignment(Qt.AlignCenter)

label.setStyleSheet("font-size: 24px; color: blue; padding: 10px;")

label.setFixedHeight(50)

mainLayout.addWidget(label)

pushButtonLayout = QHBoxLayout()

mainLayout.addLayout(pushButtonLayout)

pushButtonRed = QPushButton("Blink Red!")

pushButtonRed.setStyleSheet("background-color: red; color: white; font-size: 24px; padding:10;")

pushButtonRed.setFixedSize(150,50)

def pushButtonRedClicked():

label.setText("Blink Red!")

label.setStyleSheet(" font-size: 24px;color: red; padding:10;")

pushButtonRed.clicked.connect(pushButtonRedClicked)

pushButtonLayout.addWidget(pushButtonRed)

pushButtonGreen = QPushButton("Blink Green!")

pushButtonGreen.setStyleSheet("background-color: green; color: white; font-size: 24px; padding:10;")

pushButtonGreen.setFixedSize(150,50)

def pushButtonGreenClicked():

label.setText("Blink Green!")

label.setStyleSheet(" font-size: 24px;color: green; padding:10;")

pushButtonGreen.clicked.connect(pushButtonGreenClicked)

pushButtonLayout.addWidget(pushButtonGreen)

pushButtonBlue = QPushButton("Blink Blue!")

pushButtonBlue.setStyleSheet("background-color: blue; color: white; font-size: 24px; padding:10;")

pushButtonBlue.setFixedSize(150,50)

def pushButtonBlueClicked():

label.setText("Blink Blue!")

label.setStyleSheet(" font-size: 24px;color: blue; padding:10;")

pushButtonBlue.clicked.connect(pushButtonBlueClicked)

pushButtonLayout.addWidget(pushButtonBlue)

toggleButtonLayout = QHBoxLayout()

mainLayout.addLayout(toggleButtonLayout)

toggleButtonRed = QPushButton("Toggle Red")

toggleButtonRed.setCheckable(True)

toggleButtonRed.setStyleSheet("background-color: red; color: white; font-size: 18px; padding:10;")

toggleButtonRed.setFixedSize(150,50)

def toggleRed(checked):

if checked:

label.setText("Red Toggle ON")

label.setStyleSheet(" font-size: 24px;color: red; padding:10;")

if not checked:

label.setText("Red Toggle OFF")

label.setStyleSheet(" font-size: 24px;color: red; padding:10;")

toggleButtonRed.toggled.connect(toggleRed)

toggleButtonLayout.addWidget(toggleButtonRed)

toggleButtonGreen = QPushButton("Toggle Green")

toggleButtonGreen.setCheckable(True)

toggleButtonGreen.setStyleSheet("background-color: green; color: white; font-size: 18px; padding:10;")

toggleButtonGreen.setFixedSize(150,50)

def toggleGreen(checked):

if checked:

label.setText("Green Toggle ON")

label.setStyleSheet(" font-size: 24px;color: green; padding:10;")

if not checked:

label.setText("Green Toggle OFF")

label.setStyleSheet(" font-size: 24px;color: green; padding:10;")

toggleButtonGreen.toggled.connect(toggleGreen)

toggleButtonLayout.addWidget(toggleButtonGreen)

toggleButtonBlue = QPushButton("Toggle Blue")

toggleButtonBlue.setCheckable(True)

toggleButtonBlue.setStyleSheet("background-color: blue; color: white; font-size: 18px; padding:10;")

toggleButtonBlue.setFixedSize(150,50)

def toggleBlue(checked):

if checked:

label.setText("Blue Toggle ON")

label.setStyleSheet(" font-size: 24px;color: blue; padding:10;")

if not checked:

label.setText("Blue Toggle OFF")

label.setStyleSheet(" font-size: 24px;color: bllue; padding:10;")

toggleButtonBlue.toggled.connect(toggleBlue)

toggleButtonLayout.addWidget(toggleButtonBlue)

mainLayout.addStretch()

window.show()

sys.exit(app.exec_())

Technology Tutorials

Category Archives: Python

Python PyQt5 Magnetometer Calibration Program

Python Program to Calculate Distance and Heading Between Two GPS Points Using Haversine Formula

Controlling Brightness of Arduino LED Remotely Using PyQt and WiFi

Plot Live Data in Python Using PyQt5

Use PyQt5 to Create a Graphical User Interface for Arduino Project Over WiFi

Making The World a Better Place One High Tech Project at a Time. Enjoy!