PyQt5 Project to Control Arduino RGB LED Over WiFi

In this video lesson we add slider bars to our PyQt Widget allowing us to control the color of an RGB LED over WiFi. When using the breadvolt, or any battery power supply on a breadboard project, do not turn the power supply on while the Arduino is connected to USB, as you could generate voltage conflicts. It is an either or. If the USB is connected, the power supply should be OFF. Or if you are going to connect the USB, first turn off the power supply. The schematic for the project circuit is shown below:

Schematic of our Arduino Uno R4 Wifi connected to an RGB LED

The server side code developed in the video is presented below:

#include <WiFiS3.h>
#include "secrets.h"
WiFiUDP udp;
int PORT = 12345;
String myString;
String stringArray[10];
String response = "ACK\n";

int redPin = 9;
int greenPin = 10;
int bluePin = 11;

void setup() {
  Serial.begin(9600);
  pinMode(redPin,OUTPUT);
  pinMode(greenPin,OUTPUT);
  pinMode(bluePin,OUTPUT);
  Serial.print("Connecting to ");
  Serial.println(mySSID);
  WiFi.begin(mySSID, myPASS);
  while (WiFi.status() != WL_CONNECTED) {
    delay(100);
    Serial.print(".");
  }
  Serial.println("\nConnected to WiFi");
  Serial.println(WiFi.localIP());
  udp.begin(PORT);
  Serial.print("UDP Server started on port ");
  Serial.print(PORT);
  // put your setup code here, to run once:
}
void splitString() {
  int startIndex = 0;
  int indexCount = 0;
  int i;
  int j;
  myString = myString + ':';
  for (i = 0; i < myString.length(); i = i + 1) {
    if (myString[i] == ':') {
      stringArray[indexCount] = myString.substring(startIndex, i);
      indexCount = indexCount + 1;
      startIndex = i + 1;
    }
  }
  for (j = 0; j < indexCount; j = j + 1) {
    Serial.println(stringArray[j]);
  }
}

void loop() {
  // put your main code here, to run repeatedly:
  if (udp.parsePacket()) {
    myString = udp.readStringUntil('\n');
    Serial.println("Received : " + myString);
    udp.beginPacket(udp.remoteIP(), udp.remotePort());
    udp.print(response);
    udp.endPacket();
    Serial.println("SENT: " + response);
    splitString();
    if (stringArray[0]=="redblink"){
      for (int i =0; i<stringArray[1].toInt();i=i+1){
        Serial.println("Blink Red");
        analogWrite(redPin,stringArray[3].toInt());
        delay(stringArray[2].toInt());
          analogWrite(redPin,0);
        delay(stringArray[2].toInt());
      }      
    }
        if (stringArray[0]=="greenblink"){
      for (int i =0; i<stringArray[1].toInt();i=i+1){
        Serial.println("Blink Green");
        analogWrite(greenPin,stringArray[3].toInt());
        delay(stringArray[2].toInt());
          analogWrite(greenPin,0);
        delay(stringArray[2].toInt());
      }      
    }    if (stringArray[0]=="blueblink"){
      for (int i =0; i<stringArray[1].toInt();i=i+1){
        Serial.println("Blink Blue");
        analogWrite(bluePin,stringArray[3].toInt());
        delay(stringArray[2].toInt());
          analogWrite(bluePin,0);
        delay(stringArray[2].toInt());
      }      
    }
    if (stringArray[0]=="redOn"){
      analogWrite(redPin,stringArray[1].toInt());
    }
        if (stringArray[0]=="redOff"){
      analogWrite(redPin,0);
    }
        if (stringArray[0]=="greenOn"){
      analogWrite(greenPin,stringArray[1].toInt());
    }
        if (stringArray[0]=="greenOff"){
      analogWrite(greenPin,0);
    }
        if (stringArray[0]=="blueOn"){
      analogWrite(bluePin,stringArray[1].toInt());
    }
        if (stringArray[0]=="blueOff"){
      analogWrite(bluePin,0);
    }
    if (stringArray[0]=="redBright"){
      analogWrite(redPin,stringArray[1].toInt());
      Serial.println(stringArray[1].toInt());
    }
        if (stringArray[0]=="greenBright"){
      analogWrite(greenPin,stringArray[1].toInt());
      Serial.println(stringArray[1].toInt());
    }
        if (stringArray[0]=="blueBright"){
      analogWrite(bluePin,stringArray[1].toInt());
      Serial.println(stringArray[1].toInt());
    }
  }
}

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

#include <WiFiS3.h>

#include "secrets.h"

WiFiUDP udp;

int PORT = 12345;

String myString;

String stringArray[10];

String response = "ACK\n";

int redPin = 9;

int greenPin = 10;

int bluePin = 11;

void setup() {

Serial.begin(9600);

pinMode(redPin,OUTPUT);

pinMode(greenPin,OUTPUT);

pinMode(bluePin,OUTPUT);

Serial.print("Connecting to ");

Serial.println(mySSID);

WiFi.begin(mySSID, myPASS);

while (WiFi.status() != WL_CONNECTED) {

delay(100);

Serial.print(".");

}

Serial.println("\nConnected to WiFi");

Serial.println(WiFi.localIP());

udp.begin(PORT);

Serial.print("UDP Server started on port ");

Serial.print(PORT);

// put your setup code here, to run once:

}

void splitString() {

int startIndex = 0;

int indexCount = 0;

int i;

int j;

myString = myString + ':';

for (i = 0; i < myString.length(); i = i + 1) {

if (myString[i] == ':') {

stringArray[indexCount] = myString.substring(startIndex, i);

indexCount = indexCount + 1;

startIndex = i + 1;

}

for (j = 0; j < indexCount; j = j + 1) {

Serial.println(stringArray[j]);

}

void loop() {

// put your main code here, to run repeatedly:

if (udp.parsePacket()) {

myString = udp.readStringUntil('\n');

Serial.println("Received : " + myString);

udp.beginPacket(udp.remoteIP(), udp.remotePort());

udp.print(response);

udp.endPacket();

Serial.println("SENT: " + response);

splitString();

if (stringArray[0]=="redblink"){

for (int i =0; i<stringArray[1].toInt();i=i+1){

Serial.println("Blink Red");

analogWrite(redPin,stringArray[3].toInt());

delay(stringArray[2].toInt());

analogWrite(redPin,0);

delay(stringArray[2].toInt());

}

if (stringArray[0]=="greenblink"){

for (int i =0; i<stringArray[1].toInt();i=i+1){

Serial.println("Blink Green");

analogWrite(greenPin,stringArray[3].toInt());

delay(stringArray[2].toInt());

analogWrite(greenPin,0);

delay(stringArray[2].toInt());

}

} if (stringArray[0]=="blueblink"){

for (int i =0; i<stringArray[1].toInt();i=i+1){

Serial.println("Blink Blue");

analogWrite(bluePin,stringArray[3].toInt());

delay(stringArray[2].toInt());

analogWrite(bluePin,0);

delay(stringArray[2].toInt());

}

if (stringArray[0]=="redOn"){

analogWrite(redPin,stringArray[1].toInt());

}

if (stringArray[0]=="redOff"){

analogWrite(redPin,0);

}

if (stringArray[0]=="greenOn"){

analogWrite(greenPin,stringArray[1].toInt());

}

if (stringArray[0]=="greenOff"){

analogWrite(greenPin,0);

}

if (stringArray[0]=="blueOn"){

analogWrite(bluePin,stringArray[1].toInt());

}

if (stringArray[0]=="blueOff"){

analogWrite(bluePin,0);

}

if (stringArray[0]=="redBright"){

analogWrite(redPin,stringArray[1].toInt());

Serial.println(stringArray[1].toInt());

}

if (stringArray[0]=="greenBright"){

analogWrite(greenPin,stringArray[1].toInt());

Serial.println(stringArray[1].toInt());

}

if (stringArray[0]=="blueBright"){

analogWrite(bluePin,stringArray[1].toInt());

Serial.println(stringArray[1].toInt());

}

Remember to add the secrets.h file by adding a tab to the project, as explained in the video.

#define mySSID "YOUR WIFI NAME"
#define myPASS "YOUR WIFI PASSWORD"

1 2	#define mySSID "YOUR WIFI NAME" #define myPASS "YOUR WIFI PASSWORD"

And then on the client side, we have the following code:

from PyQt5.QtWidgets import *
from PyQt5.QtCore import *
import sys
import socket

redStrength=255
greenStrength=255
blueStrength=255
 
# Arduino’s IP address (from Arduino Serial Monitor)
HOST = "192.168.88.120"  # Use Your Arduino's IP. It will print when
                        #You Run the Arduino Server Program
PORT = 12345            # Must match Arduino’s UDP port
 
# Create a UDP socket
mySocket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
mySocket.settimeout(5.0)  # 5 seconds timeout for responses

app = QApplication([])

window = QMainWindow()
window.setWindowTitle('Welcome to GUI World')
window.setGeometry(100,100,500,300)

widgetContainer = QWidget()
window.setCentralWidget(widgetContainer)
mainLayout = QVBoxLayout(widgetContainer)

label = QLabel("Welcome to PyQt5!")
label.setAlignment(Qt.AlignCenter)
label.setStyleSheet("font-size: 24px; color: blue; padding: 10px;")
label.setFixedHeight(50)
mainLayout.addWidget(label)

pushButtonLayout = QHBoxLayout()
mainLayout.addLayout(pushButtonLayout)

pushButtonRed = QPushButton("Blink Red!")
pushButtonRed.setStyleSheet("background-color: red; color: white; font-size: 24px; padding:10;")
pushButtonRed.setFixedSize(150,50)
def pushButtonRedClicked():
    label.setText("Blink Red!")
    label.setStyleSheet(" font-size: 24px;color: red; padding:10;")
    cmd ="redblink:5:100:"+str(redStrength)+"\n"
    cmdEncoded=cmd.encode()
    mySocket.sendto(cmdEncoded, (HOST,PORT))
    print('Sent '+cmd+' to HOST',HOST,PORT)
    try:
        response, server_address = mySocket.recvfrom(1024)
        print("Server response:", response.decode())
    except socket.timeout:
        print("No response received from server within 5 seconds")
pushButtonRed.clicked.connect(pushButtonRedClicked)
pushButtonLayout.addWidget(pushButtonRed)

pushButtonGreen = QPushButton("Blink Green!")
pushButtonGreen.setStyleSheet("background-color: green; color: white; font-size: 24px; padding:10;")
pushButtonGreen.setFixedSize(150,50)
def pushButtonGreenClicked():
    label.setText("Blink Green!")
    label.setStyleSheet(" font-size: 24px;color: green; padding:10;")
    cmd ="greenblink:5:100:"+str(greenStrength)+"\n"
    cmdEncoded=cmd.encode()
    mySocket.sendto(cmdEncoded, (HOST,PORT))
    print('Sent '+cmd+' to HOST',HOST,PORT)
    try:
        response, server_address = mySocket.recvfrom(1024)
        print("Server response:", response.decode())
    except socket.timeout:
        print("No response received from server within 5 seconds")
    
pushButtonGreen.clicked.connect(pushButtonGreenClicked)
pushButtonLayout.addWidget(pushButtonGreen)

pushButtonBlue = QPushButton("Blink Blue!")
pushButtonBlue.setStyleSheet("background-color: blue; color: white; font-size: 24px; padding:10;")
pushButtonBlue.setFixedSize(150,50)
def pushButtonBlueClicked():
    label.setText("Blink Blue!")
    label.setStyleSheet(" font-size: 24px;color: blue; padding:10;")
    cmd ="blueblink:5:100:"+str(blueStrength)+"\n"
    cmdEncoded=cmd.encode()
    mySocket.sendto(cmdEncoded, (HOST,PORT))
    print('Sent '+cmd+' to HOST',HOST,PORT)
    try:
        response, server_address = mySocket.recvfrom(1024)
        print("Server response:", response.decode())
    except socket.timeout:
        print("No response received from server within 5 seconds")
 
pushButtonBlue.clicked.connect(pushButtonBlueClicked)
pushButtonLayout.addWidget(pushButtonBlue)

toggleButtonLayout = QHBoxLayout()
mainLayout.addLayout(toggleButtonLayout)


toggleButtonRed = QPushButton("Toggle Red")
toggleButtonRed.setCheckable(True)
toggleButtonRed.setStyleSheet("background-color: red; color: white; font-size: 18px; padding:10;")
toggleButtonRed.setFixedSize(150,50)
def toggleRed(checked):
    if checked:
        label.setText("Red Toggle ON")
        label.setStyleSheet(" font-size: 24px;color: red; padding:10;")
        cmd="redOn:"+str(redStrength)+"\n"
        cmdEncoded=cmd.encode()
        mySocket.sendto(cmdEncoded, (HOST,PORT))
        print('Sent '+cmd+' to HOST',HOST,PORT)
        try:
            response, server_address = mySocket.recvfrom(1024)
            print("Server response:", response.decode())
        except socket.timeout:
            print("No response received from server within 5 seconds")
    if not checked:
        label.setText("Red Toggle OFF")
        label.setStyleSheet(" font-size: 24px;color: red; padding:10;")
        cmd="redOff:0\n"
        cmdEncoded=cmd.encode()
        mySocket.sendto(cmdEncoded, (HOST,PORT))
        print('Sent '+cmd+' to HOST',HOST,PORT)
        try:
            response, server_address = mySocket.recvfrom(1024)
            print("Server response:", response.decode())
        except socket.timeout:
            print("No response received from server within 5 seconds") 
        

toggleButtonRed.toggled.connect(toggleRed)
toggleButtonLayout.addWidget(toggleButtonRed)

toggleButtonGreen = QPushButton("Toggle Green")
toggleButtonGreen.setCheckable(True)
toggleButtonGreen.setStyleSheet("background-color: green; color: white; font-size: 18px; padding:10;")
toggleButtonGreen.setFixedSize(150,50)
def toggleGreen(checked):
    if checked:
        label.setText("Green Toggle ON")
        label.setStyleSheet(" font-size: 24px;color: green; padding:10;")
        cmd="greenOn:"+str(greenStrength)+"\n"
        cmdEncoded=cmd.encode()
        mySocket.sendto(cmdEncoded, (HOST,PORT))
        print('Sent '+cmd+' to HOST',HOST,PORT)
        try:
            response, server_address = mySocket.recvfrom(1024)
            print("Server response:", response.decode())
        except socket.timeout:
            print("No response received from server within 5 seconds")
    if not checked:
        label.setText("Green Toggle OFF")
        label.setStyleSheet(" font-size: 24px;color: green; padding:10;")
        cmd="greenOff:0\n"
        cmdEncoded=cmd.encode()
        mySocket.sendto(cmdEncoded, (HOST,PORT))
        print('Sent '+cmd+' to HOST',HOST,PORT)
        try:
            response, server_address = mySocket.recvfrom(1024)
            print("Server response:", response.decode())
        except socket.timeout:
            print("No response received from server within 5 seconds") 
   
toggleButtonGreen.toggled.connect(toggleGreen)
toggleButtonLayout.addWidget(toggleButtonGreen)

toggleButtonBlue = QPushButton("Toggle Blue")
toggleButtonBlue.setCheckable(True)
toggleButtonBlue.setStyleSheet("background-color: blue; color: white; font-size: 18px; padding:10;")
toggleButtonBlue.setFixedSize(150,50)
def toggleBlue(checked):
    if checked:
        label.setText("Blue Toggle ON")
        label.setStyleSheet(" font-size: 24px;color: blue; padding:10;")
        cmd="blueOn:"+str(blueStrength)+"\n"
        cmdEncoded=cmd.encode()
        mySocket.sendto(cmdEncoded, (HOST,PORT))
        print('Sent '+cmd+' to HOST',HOST,PORT)
        try:
            response, server_address = mySocket.recvfrom(1024)
            print("Server response:", response.decode())
        except socket.timeout:
            print("No response received from server within 5 seconds")
    if not checked:
        label.setText("Blue Toggle OFF")
        label.setStyleSheet(" font-size: 24px;color: blue; padding:10;")
        cmd="blueOff:0\n"
        cmdEncoded=cmd.encode()
        mySocket.sendto(cmdEncoded, (HOST,PORT))
        print('Sent '+cmd+' to HOST',HOST,PORT)
        try:
            response, server_address = mySocket.recvfrom(1024)
            print("Server response:", response.decode())
        except socket.timeout:
            print("No response received from server within 5 seconds") 
   
toggleButtonBlue.toggled.connect(toggleBlue)
toggleButtonLayout.addWidget(toggleButtonBlue)

redSlider = QSlider(Qt.Horizontal)
redSlider.setMinimum(0)
redSlider.setMaximum(100)
redSlider.setValue(100)
redSlider.setStyleSheet("""
QSlider::groove:horizontal {background: lightpink; height:20px;border-radius:5px;}
QSlider::handle:horizontal {background: red; margin-top: -10px; margin-bottom: -10px ; height: 40;width: 20px;border-radius: 5px;} 
""")
redSlider.setFixedHeight(50)
def updateRedSlider():
    global redStrength
    label.setText("Red Slider: "+str(redSlider.value()))
    label.setStyleSheet("font-size: 24px; color: red; padding:10;")
    redStrength = int(redSlider.value()/100*255)
    print("Red Strength: ",redStrength)
    cmd="redBright:"+str(redStrength)+"\n"
    cmdEncoded=cmd.encode()
    mySocket.sendto(cmdEncoded, (HOST,PORT))
    try:
        response,server_address = mySocket.recvfrom(1024)
        print("Server response: ",response.decode())
    except socket.timeout:
        print("No Response for the Server for TimeOut")
    
redSlider.valueChanged.connect(updateRedSlider)
mainLayout.addWidget(redSlider)

greenSlider = QSlider(Qt.Horizontal)
greenSlider.setMinimum(0)
greenSlider.setMaximum(100)
greenSlider.setValue(100)
greenSlider.setStyleSheet("""
QSlider::groove:horizontal {background: lightgreen; height:20px;border-radius:5px;}
QSlider::handle:horizontal {background: green; margin-top: -10px; margin-bottom: -10px ; height: 40;width: 20px;border-radius: 5px;} 
""")
greenSlider.setFixedHeight(50)
def updateGreenSlider():
    global greenStrength
    label.setText("Green Slider: "+str(greenSlider.value()))
    label.setStyleSheet("font-size: 24px; color: green; padding:10;")
    greenStrength = int(greenSlider.value()/100*255)
    print("Green Strength: ",greenStrength)
    cmd="greenBright:"+str(greenStrength)+"\n"
    cmdEncoded=cmd.encode()
    mySocket.sendto(cmdEncoded, (HOST,PORT))
    try:
        response,server_address = mySocket.recvfrom(1024)
        print("Server response: ",response.decode())
    except socket.timeout:
        print("No Response for the Server for TimeOut")
greenSlider.valueChanged.connect(updateGreenSlider)
mainLayout.addWidget(greenSlider)

blueSlider = QSlider(Qt.Horizontal)
blueSlider.setMinimum(0)
blueSlider.setMaximum(100)
blueSlider.setValue(100)
blueSlider.setStyleSheet("""
QSlider::groove:horizontal {background: lightblue; height:20px;border-radius:5px;}
QSlider::handle:horizontal {background: blue; margin-top: -10px; margin-bottom: -10px ; height: 40;width: 20px;border-radius: 5px;} 
""")
blueSlider.setFixedHeight(50)
def updateBlueSlider():
    global blueStrength
    label.setText("Blue Slider: "+str(blueSlider.value()))
    label.setStyleSheet("font-size: 24px; color: blue; padding:10;")
    blueStrength = int(blueSlider.value()/100*255)
    print("Blue Strength: ",blueStrength)
    cmd="blueBright:"+str(blueStrength)+"\n"
    cmdEncoded=cmd.encode()
    mySocket.sendto(cmdEncoded, (HOST,PORT))
    try:
        response,server_address = mySocket.recvfrom(1024)
        print("Server response: ",response.decode())
    except socket.timeout:
        print("No Response for the Server for TimeOut") 
blueSlider.valueChanged.connect(updateBlueSlider)
mainLayout.addWidget(blueSlider)

mainLayout.addStretch()
window.show()
sys.exit(app.exec_())

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

267

268

269

270

271

272

273

274

275

276

277

278

279

from PyQt5.QtWidgets import *

from PyQt5.QtCore import *

import sys

import socket

redStrength=255

greenStrength=255

blueStrength=255

# Arduino’s IP address (from Arduino Serial Monitor)

HOST = "192.168.88.120" # Use Your Arduino's IP. It will print when

#You Run the Arduino Server Program

PORT = 12345 # Must match Arduino’s UDP port

# Create a UDP socket

mySocket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)

mySocket.settimeout(5.0) # 5 seconds timeout for responses

app = QApplication([])

window = QMainWindow()

window.setWindowTitle('Welcome to GUI World')

window.setGeometry(100,100,500,300)

widgetContainer = QWidget()

window.setCentralWidget(widgetContainer)

mainLayout = QVBoxLayout(widgetContainer)

label = QLabel("Welcome to PyQt5!")

label.setAlignment(Qt.AlignCenter)

label.setStyleSheet("font-size: 24px; color: blue; padding: 10px;")

label.setFixedHeight(50)

mainLayout.addWidget(label)

pushButtonLayout = QHBoxLayout()

mainLayout.addLayout(pushButtonLayout)

pushButtonRed = QPushButton("Blink Red!")

pushButtonRed.setStyleSheet("background-color: red; color: white; font-size: 24px; padding:10;")

pushButtonRed.setFixedSize(150,50)

def pushButtonRedClicked():

label.setText("Blink Red!")

label.setStyleSheet(" font-size: 24px;color: red; padding:10;")

cmd ="redblink:5:100:"+str(redStrength)+"\n"

cmdEncoded=cmd.encode()

mySocket.sendto(cmdEncoded, (HOST,PORT))

print('Sent '+cmd+' to HOST',HOST,PORT)

try:

response, server_address = mySocket.recvfrom(1024)

print("Server response:", response.decode())

except socket.timeout:

print("No response received from server within 5 seconds")

pushButtonRed.clicked.connect(pushButtonRedClicked)

pushButtonLayout.addWidget(pushButtonRed)

pushButtonGreen = QPushButton("Blink Green!")

pushButtonGreen.setStyleSheet("background-color: green; color: white; font-size: 24px; padding:10;")

pushButtonGreen.setFixedSize(150,50)

def pushButtonGreenClicked():

label.setText("Blink Green!")

label.setStyleSheet(" font-size: 24px;color: green; padding:10;")

cmd ="greenblink:5:100:"+str(greenStrength)+"\n"

cmdEncoded=cmd.encode()

mySocket.sendto(cmdEncoded, (HOST,PORT))

print('Sent '+cmd+' to HOST',HOST,PORT)

try:

response, server_address = mySocket.recvfrom(1024)

print("Server response:", response.decode())

except socket.timeout:

print("No response received from server within 5 seconds")

pushButtonGreen.clicked.connect(pushButtonGreenClicked)

pushButtonLayout.addWidget(pushButtonGreen)

pushButtonBlue = QPushButton("Blink Blue!")

pushButtonBlue.setStyleSheet("background-color: blue; color: white; font-size: 24px; padding:10;")

pushButtonBlue.setFixedSize(150,50)

def pushButtonBlueClicked():

label.setText("Blink Blue!")

label.setStyleSheet(" font-size: 24px;color: blue; padding:10;")

cmd ="blueblink:5:100:"+str(blueStrength)+"\n"

cmdEncoded=cmd.encode()

mySocket.sendto(cmdEncoded, (HOST,PORT))

print('Sent '+cmd+' to HOST',HOST,PORT)

try:

response, server_address = mySocket.recvfrom(1024)

print("Server response:", response.decode())

except socket.timeout:

print("No response received from server within 5 seconds")

pushButtonBlue.clicked.connect(pushButtonBlueClicked)

pushButtonLayout.addWidget(pushButtonBlue)

toggleButtonLayout = QHBoxLayout()

mainLayout.addLayout(toggleButtonLayout)

toggleButtonRed = QPushButton("Toggle Red")

toggleButtonRed.setCheckable(True)

toggleButtonRed.setStyleSheet("background-color: red; color: white; font-size: 18px; padding:10;")

toggleButtonRed.setFixedSize(150,50)

def toggleRed(checked):

if checked:

label.setText("Red Toggle ON")

label.setStyleSheet(" font-size: 24px;color: red; padding:10;")

cmd="redOn:"+str(redStrength)+"\n"

cmdEncoded=cmd.encode()

mySocket.sendto(cmdEncoded, (HOST,PORT))

print('Sent '+cmd+' to HOST',HOST,PORT)

try:

response, server_address = mySocket.recvfrom(1024)

print("Server response:", response.decode())

except socket.timeout:

print("No response received from server within 5 seconds")

if not checked:

label.setText("Red Toggle OFF")

label.setStyleSheet(" font-size: 24px;color: red; padding:10;")

cmd="redOff:0\n"

cmdEncoded=cmd.encode()

mySocket.sendto(cmdEncoded, (HOST,PORT))

print('Sent '+cmd+' to HOST',HOST,PORT)

try:

response, server_address = mySocket.recvfrom(1024)

print("Server response:", response.decode())

except socket.timeout:

print("No response received from server within 5 seconds")

toggleButtonRed.toggled.connect(toggleRed)

toggleButtonLayout.addWidget(toggleButtonRed)

toggleButtonGreen = QPushButton("Toggle Green")

toggleButtonGreen.setCheckable(True)

toggleButtonGreen.setStyleSheet("background-color: green; color: white; font-size: 18px; padding:10;")

toggleButtonGreen.setFixedSize(150,50)

def toggleGreen(checked):

if checked:

label.setText("Green Toggle ON")

label.setStyleSheet(" font-size: 24px;color: green; padding:10;")

cmd="greenOn:"+str(greenStrength)+"\n"

cmdEncoded=cmd.encode()

mySocket.sendto(cmdEncoded, (HOST,PORT))

print('Sent '+cmd+' to HOST',HOST,PORT)

try:

response, server_address = mySocket.recvfrom(1024)

print("Server response:", response.decode())

except socket.timeout:

print("No response received from server within 5 seconds")

if not checked:

label.setText("Green Toggle OFF")

label.setStyleSheet(" font-size: 24px;color: green; padding:10;")

cmd="greenOff:0\n"

cmdEncoded=cmd.encode()

mySocket.sendto(cmdEncoded, (HOST,PORT))

print('Sent '+cmd+' to HOST',HOST,PORT)

try:

response, server_address = mySocket.recvfrom(1024)

print("Server response:", response.decode())

except socket.timeout:

print("No response received from server within 5 seconds")

toggleButtonGreen.toggled.connect(toggleGreen)

toggleButtonLayout.addWidget(toggleButtonGreen)

toggleButtonBlue = QPushButton("Toggle Blue")

toggleButtonBlue.setCheckable(True)

toggleButtonBlue.setStyleSheet("background-color: blue; color: white; font-size: 18px; padding:10;")

toggleButtonBlue.setFixedSize(150,50)

def toggleBlue(checked):

if checked:

label.setText("Blue Toggle ON")

label.setStyleSheet(" font-size: 24px;color: blue; padding:10;")

cmd="blueOn:"+str(blueStrength)+"\n"

cmdEncoded=cmd.encode()

mySocket.sendto(cmdEncoded, (HOST,PORT))

print('Sent '+cmd+' to HOST',HOST,PORT)

try:

response, server_address = mySocket.recvfrom(1024)

print("Server response:", response.decode())

except socket.timeout:

print("No response received from server within 5 seconds")

if not checked:

label.setText("Blue Toggle OFF")

label.setStyleSheet(" font-size: 24px;color: blue; padding:10;")

cmd="blueOff:0\n"

cmdEncoded=cmd.encode()

mySocket.sendto(cmdEncoded, (HOST,PORT))

print('Sent '+cmd+' to HOST',HOST,PORT)

try:

response, server_address = mySocket.recvfrom(1024)

print("Server response:", response.decode())

except socket.timeout:

print("No response received from server within 5 seconds")

toggleButtonBlue.toggled.connect(toggleBlue)

toggleButtonLayout.addWidget(toggleButtonBlue)

redSlider = QSlider(Qt.Horizontal)

redSlider.setMinimum(0)

redSlider.setMaximum(100)

redSlider.setValue(100)

redSlider.setStyleSheet("""

QSlider::groove:horizontal {background: lightpink; height:20px;border-radius:5px;}

QSlider::handle:horizontal {background: red; margin-top: -10px; margin-bottom: -10px ; height: 40;width: 20px;border-radius: 5px;}

""")

redSlider.setFixedHeight(50)

def updateRedSlider():

global redStrength

label.setText("Red Slider: "+str(redSlider.value()))

label.setStyleSheet("font-size: 24px; color: red; padding:10;")

redStrength = int(redSlider.value()/100*255)

print("Red Strength: ",redStrength)

cmd="redBright:"+str(redStrength)+"\n"

cmdEncoded=cmd.encode()

mySocket.sendto(cmdEncoded, (HOST,PORT))

try:

response,server_address = mySocket.recvfrom(1024)

print("Server response: ",response.decode())

except socket.timeout:

print("No Response for the Server for TimeOut")

redSlider.valueChanged.connect(updateRedSlider)

mainLayout.addWidget(redSlider)

greenSlider = QSlider(Qt.Horizontal)

greenSlider.setMinimum(0)

greenSlider.setMaximum(100)

greenSlider.setValue(100)

greenSlider.setStyleSheet("""

QSlider::groove:horizontal {background: lightgreen; height:20px;border-radius:5px;}

QSlider::handle:horizontal {background: green; margin-top: -10px; margin-bottom: -10px ; height: 40;width: 20px;border-radius: 5px;}

""")

greenSlider.setFixedHeight(50)

def updateGreenSlider():

global greenStrength

label.setText("Green Slider: "+str(greenSlider.value()))

label.setStyleSheet("font-size: 24px; color: green; padding:10;")

greenStrength = int(greenSlider.value()/100*255)

print("Green Strength: ",greenStrength)

cmd="greenBright:"+str(greenStrength)+"\n"

cmdEncoded=cmd.encode()

mySocket.sendto(cmdEncoded, (HOST,PORT))

try:

response,server_address = mySocket.recvfrom(1024)

print("Server response: ",response.decode())

except socket.timeout:

print("No Response for the Server for TimeOut")

greenSlider.valueChanged.connect(updateGreenSlider)

mainLayout.addWidget(greenSlider)

blueSlider = QSlider(Qt.Horizontal)

blueSlider.setMinimum(0)

blueSlider.setMaximum(100)

blueSlider.setValue(100)

blueSlider.setStyleSheet("""

QSlider::groove:horizontal {background: lightblue; height:20px;border-radius:5px;}

QSlider::handle:horizontal {background: blue; margin-top: -10px; margin-bottom: -10px ; height: 40;width: 20px;border-radius: 5px;}

""")

blueSlider.setFixedHeight(50)

def updateBlueSlider():

global blueStrength

label.setText("Blue Slider: "+str(blueSlider.value()))

label.setStyleSheet("font-size: 24px; color: blue; padding:10;")

blueStrength = int(blueSlider.value()/100*255)

print("Blue Strength: ",blueStrength)

cmd="blueBright:"+str(blueStrength)+"\n"

cmdEncoded=cmd.encode()

mySocket.sendto(cmdEncoded, (HOST,PORT))

try:

response,server_address = mySocket.recvfrom(1024)

print("Server response: ",response.decode())

except socket.timeout:

print("No Response for the Server for TimeOut")

blueSlider.valueChanged.connect(updateBlueSlider)

mainLayout.addWidget(blueSlider)

mainLayout.addStretch()

window.show()

sys.exit(app.exec_())

Technology Tutorials

PyQt5 Project to Control Arduino RGB LED Over WiFi

Making The World a Better Place One High Tech Project at a Time. Enjoy!